Обсуждение: Performance tuning

Hi all,

I'm preparing a set of servers which will eventually need to handle a high
volume of queries (both reads and writes, but most reads are very simple
index-based queries returning a limited set of rows, when not just one),
and I would like to optimize things as much as possible, so I have a few
questions on the exact way PostgreSQL's MVCC works, and how transactions,
updates and vacuuming interact. I hope someone will be able to point me in
the right direction (feel free to give pointers if I missed the places
where this is described).

 From what I understand (and testing confirms it), bundling many queries in
one single transaction is more efficient than having each query be a
separate transaction (like with autocommit on). However, I wonder about the
limits of this:

- are there any drawbacks to grouping hundreds or thousands of queries
(inserts/updates) over several minutes in one single transaction? Other
than the fact that the inserts/updates will not be visible until committed,
of course. Essentially turning autocommit off, and doing a commit once in a
while.

- does this apply only to inserts/selects/updates or also for selects?
Another way to put this is: does a transaction with only one select
actually have much transaction-related work to do? Or, does a transaction
with only selects actually have any impact anywhere? Does it really leave a
trace anywhere? Again, I understand that selects grouped in a transaction
will not see updates done after the start of the transaction (unless done
by the same process).

- if during a single transaction several UPDATEs affect the same row, will
MVCC generate as many row versions as there are updates (like would be the
case with autocommit) or will they be grouped into one single row version?

Another related issue is that many of the tables are indexed on a date
field, and one process does a lot of updates on "recent" rows (which lead
to many dead tuples), but after that "older" rows tend to remain pretty
much unchanged for quite a while. Other than splitting the tables into
"old" and "recent" tables, is there any way to make vacuum more efficient?
Scanning the whole table for dead tuples when only a small portion of the
table actually has any does not feel like being very efficient in this
situation.

Other issue: every five minutes or so, I see a noticeable performance drop
as PostgreSQL checkpoints. This is 7.4.3 with pretty lousy hardware, I know
8.0 with decent hardware and separate disk(s) for pg_xlog will definitely
help, but I really wonder if there is any way to reduce the amount of work
that needs to be done at that point (I'm a strong believer of fixing
software before hardware). I have already bumped checkpoint_segments to 8,
but I'm not quite sure I understand how this helps (or doesn't help)
things. Logs show 3 to 6 "recycled transaction log file" lines at that
time, that seems quite a lot of work for a load that's still pretty low.
Does grouping of more queries in transactions help with this? Are there
other parameters that can affect things, or is just a matter of how much
inserts/updates/deletes are done, and the amount of data that was changed?

Last point: some of the servers have expandable data (and will be
replicated with slony-I) and will run with fsync off. I have read
conflicting statements as to what exactly this does: some sources indicate
that setting fsync off actually switches off WAL/checkpointing, others that
it just prevents the fsync (or equivalent) system calls. Since I still see
checkpointing in that case, I guess it's not exactly the former, but I
would love to understand more about it. Really, I would love to be able to
set some tables or databases to "go as fast as you can and don't worry
about transactions, MVCC or anything like that", but I'm not sure that
option exists...

Thanks,

Jacques.

Hello All,

I have a couple of questions about running 2 databases:

1) on a single 7.4.6 postgres instance does each database have it own WAL
    file or is that shared? Is it the same on 8.0.x?

2) what's the high performance way of moving 200 rows between similar
    tables on different databases? Does it matter if the databases are
    on the same or seperate postgres instances?

Background:
My web app does lots of inserts that aren't read until a session is
complete. The plan is to put the heavy insert session onto a ramdisk based
pg-db and transfer the relevant data to the master pg-db upon session
completion. Currently running 7.4.6.

Individual session data is not as critical as the master pg-db so the risk
associated with running the session pg-db on a ramdisk is acceptable.
All this is to get past the I/O bottleneck, already tweaked the config
files, run on multiple RAID-1 spindles, profiled the queries, maxed
the CPU/ram. Migrating to 64bit fedora soon.

Thanks, this mailing list has been invaluable.

Jelle

jelle <jellej@pacbell.net> writes:
> 1) on a single 7.4.6 postgres instance does each database have it own WAL
>     file or is that shared? Is it the same on 8.0.x?

Shared.

> 2) what's the high performance way of moving 200 rows between similar
>     tables on different databases? Does it matter if the databases are
>     on the same or seperate postgres instances?

COPY would be my recommendation.  For a no-programming-effort solution
you could just pipe the output of pg_dump --data-only -t mytable
into psql.  Not sure if it's worth developing a custom application to
replace that.

> My web app does lots of inserts that aren't read until a session is
> complete. The plan is to put the heavy insert session onto a ramdisk based
> pg-db and transfer the relevant data to the master pg-db upon session
> completion. Currently running 7.4.6.

Unless you have a large proportion of sessions that are abandoned and
hence never need be transferred to the main database at all, this seems
like a dead waste of effort :-(.  The work to put the data into the main
database isn't lessened at all; you've just added extra work to manage
the buffer database.

            regards, tom lane

On Fri, 11 Mar 2005, Tom Lane wrote:

[ snip ]

> COPY would be my recommendation.  For a no-programming-effort solution
> you could just pipe the output of pg_dump --data-only -t mytable
> into psql.  Not sure if it's worth developing a custom application to
> replace that.

I'm a programming-effort kind of guy so I'll try COPY.

>
>> My web app does lots of inserts that aren't read until a session is
>> complete. The plan is to put the heavy insert session onto a ramdisk based
>> pg-db and transfer the relevant data to the master pg-db upon session
>> completion. Currently running 7.4.6.
>
> Unless you have a large proportion of sessions that are abandoned and
> hence never need be transferred to the main database at all, this seems
> like a dead waste of effort :-(.  The work to put the data into the main
> database isn't lessened at all; you've just added extra work to manage
> the buffer database.

The insert heavy sessions average 175 page hits generating XML, 1000
insert/updates which comprise 90% of the insert/update load, of which 200
inserts need to be transferred to the master db. The other sessions are
read/cache bound. I hoping to get a speed-up from moving the temporary
stuff off the master db and using 1 transaction instead of 175 to the disk
based master db.

Thanks,
Jelle

> My web app does lots of inserts that aren't read until a session is
> complete. The plan is to put the heavy insert session onto a ramdisk
> based pg-db and transfer the relevant data to the master pg-db upon
> session completion. Currently running 7.4.6.

    From what you say I'd think you want to avoid making one write
transaction to the main database on each page view, right ?
    You could simply store the data in a file, and at the end of the session,
read the file and do all the writes in one transaction.

Jacques Caron wrote:
> I'm preparing a set of servers which will eventually need to handle a
> high volume of queries (both reads and writes, but most reads are very
> simple index-based queries returning a limited set of rows, when not
> just one), and I would like to optimize things as much as possible, so I
> have a few questions on the exact way PostgreSQL's MVCC works, and how
> transactions, updates and vacuuming interact. I hope someone will be
> able to point me in the right direction (feel free to give pointers if I
> missed the places where this is described).
>
>  From what I understand (and testing confirms it), bundling many queries
> in one single transaction is more efficient than having each query be a
> separate transaction (like with autocommit on). However, I wonder about
> the limits of this:
>
> - are there any drawbacks to grouping hundreds or thousands of queries
> (inserts/updates) over several minutes in one single transaction? Other
> than the fact that the inserts/updates will not be visible until
> committed, of course. Essentially turning autocommit off, and doing a
> commit once in a while.

1. If any locks are held then they will be held for much longer, causing
other processes to block.
2. PG needs to be able to roll back the changes - thousands of simple
inserts are fine, millions will probably not be.

> - does this apply only to inserts/selects/updates or also for selects?
> Another way to put this is: does a transaction with only one select
> actually have much transaction-related work to do? Or, does a
> transaction with only selects actually have any impact anywhere? Does it
> really leave a trace anywhere? Again, I understand that selects grouped
> in a transaction will not see updates done after the start of the
> transaction (unless done by the same process).

There are implications if a SELECT has side-effects (I can call a
function in a select - that might do anything).

> - if during a single transaction several UPDATEs affect the same row,
> will MVCC generate as many row versions as there are updates (like would
> be the case with autocommit) or will they be grouped into one single row
> version?

I believe there will be many versions. Certainly for 8.0 that must be
the case to support savepoints within a transaction.

> Another related issue is that many of the tables are indexed on a date
> field, and one process does a lot of updates on "recent" rows (which
> lead to many dead tuples), but after that "older" rows tend to remain
> pretty much unchanged for quite a while. Other than splitting the tables
> into "old" and "recent" tables, is there any way to make vacuum more
> efficient? Scanning the whole table for dead tuples when only a small
> portion of the table actually has any does not feel like being very
> efficient in this situation.

Not really.

> Other issue: every five minutes or so, I see a noticeable performance
> drop as PostgreSQL checkpoints. This is 7.4.3 with pretty lousy
> hardware, I know 8.0 with decent hardware and separate disk(s) for
> pg_xlog will definitely help, but I really wonder if there is any way to
> reduce the amount of work that needs to be done at that point (I'm a
> strong believer of fixing software before hardware). I have already
> bumped checkpoint_segments to 8, but I'm not quite sure I understand how
> this helps (or doesn't help) things. Logs show 3 to 6 "recycled
> transaction log file" lines at that time, that seems quite a lot of work
> for a load that's still pretty low. Does grouping of more queries in
> transactions help with this? Are there other parameters that can affect
> things, or is just a matter of how much inserts/updates/deletes are
> done, and the amount of data that was changed?

You might be better off reducing the number of checkpoint segments, and
decreasing the timeout. There is a balance between doing a lot of work
in one go, and the overhead of many smaller bursts of activity.

> Last point: some of the servers have expandable data (and will be
> replicated with slony-I) and will run with fsync off. I have read
> conflicting statements as to what exactly this does: some sources
> indicate that setting fsync off actually switches off WAL/checkpointing,
> others that it just prevents the fsync (or equivalent) system calls.
> Since I still see checkpointing in that case, I guess it's not exactly
> the former, but I would love to understand more about it. Really, I
> would love to be able to set some tables or databases to "go as fast as
> you can and don't worry about transactions, MVCC or anything like that",
> but I'm not sure that option exists...

Setting fsync=false means the sync isn't done, so data might still be
cached below PG's level. I'm not sure it's ever going to be possible to
mark a table as "ignore transactions" - it would be a lot of work, and
means you couldn't guarantee transactions that included that table in
any way.

--
   Richard Huxton
   Archonet Ltd

jelle wrote:
> The insert heavy sessions average 175 page hits generating XML, 1000
> insert/updates which comprise 90% of the insert/update load, of which
> 200 inserts need to be transferred to the master db. The other
> sessions are read/cache bound. I hoping to get a speed-up from moving
>  the temporary stuff off the master db and using 1 transaction
> instead of 175 to the disk based master db.

Just a thought:
Wouldn't it be sufficient to have the "temporary", fast session-table
in a RAM-disk? I suspect you could do this rather easily using a TABLESPACE.
All the indices could be in this TABLESPACE as well (at least after
having a quick look at the short help for CREATE TABLE and assuming you are
using PostgreSQL >= 8.0).

Regards
Mirko