Re: [ADMIN] Performance difference between servers
От | Rui DeSousa |
---|---|
Тема | Re: [ADMIN] Performance difference between servers |
Дата | |
Msg-id | D7F38130-693A-4C1A-8575-52231D6F41C7@icloud.com обсуждение исходный текст |
Ответ на | Re: [ADMIN] Performance difference between servers (<kpi6288@gmail.com>) |
Список | pgsql-admin |
There is a log of variables there. Is the i7 single core performance faster than the E3? Bus/memory speeds, etc. I would also consider any vCPU imbalances. You could end up with guest scheduling issue; i.e if guest requires 1 core but is allocated 4 cores; then for 4 cores still need to be available and ready to schedule the guest even if it current need is only 1 core at the moment.
On Nov 15, 2017, at 12:43 PM, kpi6288@gmail.com wrote:Trying as best as a can:#1 HP 8200 Elite microtower, i7-2600, 16GB RAM, 1 SSD 480 GB, 1 SSD 900 GB, Hyper-V 2012 R2 (not 2008 R2 as written in my original question)#2 Lenovo TS 150, E3-1245 V5, 40GB RAM, 2 SSD 850GB as RAID 1 (BIOS level), 2 HDDs 1TB as RAID 1 (BIOS level)#3 model unknown, E3-1270 V3, 32GB RAM, 2 SSD 480GB as RAID 1 (BIOS level)Server #1 is more a PC than a server.Server #1 runs in total 4 virtual guests. 8GB and 6 „cores“ dedicated to the server running PostgreSQL and 3GB to other machines which are almost 100% idle.Server #2 has currently on the one guets running PostgreSQL with 16GB RAM and 6 „cores“ dedicated.Server #3 runs 2 virtual guests. 12GB and 4 cores dedicated tot he guest runnning PostgreSQL. 4 GB and 3 cores decicated to another guest with is practically idle.Servers #2 and #3 have still plenty of free disk space while server #1 is using approx. 70% oft he disks.Server #1 has much older SSDs than #2. Not sure about #3.Von: Scott Whitney [mailto:scott@journyx.com]
Gesendet: Mittwoch, 15. November 2017 18:19
An: kpi6288@gmail.com
Betreff: Re: [ADMIN] Performance difference between serversCan you post the hardware host specs for #1, #2 and #3? If those ARE the hardware specs (for example, you list SSDs), can you list the resources assigned to the guests?
From: kpi6288@gmail.com <kpi6288@gmail.com>
Sent: Wednesday, November 15, 2017 11:15 AM
To: Scott Whitney
Subject: AW: [ADMIN] Performance difference between serversYes, exactly:Three different (hardware) machines, each having a hyper-V host and the Windows Servers as Hyper-V guests.Von: Scott Whitney [mailto:scott@journyx.com]
Gesendet: Mittwoch, 15. November 2017 18:11
An: kpi6288@gmail.com; pgsql-admin@postgresql.org
Betreff: Re: [ADMIN] Performance difference between serversAre you saying that each of these servers is a virtual HyperV machine running under a hardware host?
From: pgsql-admin-owner@postgresql.org <pgsql-admin-owner@postgresql.org> on behalf of kpi6288@gmail.com <kpi6288@gmail.com>
Sent: Wednesday, November 15, 2017 11:06 AM
To: pgsql-admin@postgresql.org
Subject: [ADMIN] Performance difference between serversWe have 3 different servers, one (the oldest) ist significantly faster at certain operations and I can’t find out the reason:(table created in monospace font)Server Processor RAM CrystalDiskMark pgbench CREATE DATABASE OS#1 i7-2600 8GB 495 / 473 26.000 4.5 … 6 s W/ Server 2008 R2 on Hyper V Server 2008#2 E3-1245 16GB 797 / 514 50.000 13 … 19 s W/ Server 2016 Std. on Hyper V Server 2016#3 E3-1270 12GB 933 / 334 40.000 13 … 20 s W/ Server 2008 Essentials on Hyper V Server 2016CrystalDiskMark: „Seq Q32T1“Pgbench:pgbench -i -s 200 -U postgres pgbenchpgbench -c 40 -j 10 -T 150 -U postgres -S -P 5 pgbenchCREATE DATABASE:create database test with template myTemplateAll running PostgreSQL 9.6 x64 with similar configuration. All running as virtual machines, no other virtual machines creating any load. Using the same template database on all machines.Although the indicative numbers of pgbench and CrystalDiskMark show better values for server #2 and #3, server #1 creates a new database considerably faster.All servers have SSDs. Server #1 has two single SSDs (a system disk and a data disk). Servers #2 and #3 have only one logical disk for system and data, and this is two SSDs running as RAID 1. This may be slower but if it is, I would excpect this also to show up in the pgbench results.The reason behind this exercise is that a test application was also reported to be slower on server #2 and 3.Any idea how to track down the performance difference?Thank youKlausJournyx, Inc.7600 Burnet Road #300
Austin, TX 78757
www.journyx.comp 512.834.8888f 512-834-8858Do you receive our promotional emails? Click here or visit http://journyx.com/communication-preferences to unsubscribe.
В списке pgsql-admin по дате отправления:
Предыдущее
От: rammohan ganapavarapuДата:
Сообщение: Re: [ADMIN] Can master and slave on different PG versions?
Следующее
От: Laurenz AlbeДата:
Сообщение: Re: [ADMIN] foreign tables query performance using postgres_fdw