Обсуждение: GiST indexes and concurrency (tsearch2)
Hi, according to http://www.postgresql.org/docs/8.0/interactive/limitations.html , concurrent access to GiST indexes isn't possible at the moment. I haven't read the thesis mentioned there, but I presume that concurrent read access is also impossible. Is there any workaround for this, esp. if the index is usually only read and not written to? It seems to be a big problem with tsearch2, when multiple clients are hammering the db (we have a quad opteron box here that stays 75% idle despite an apachebench with concurrency 10 stressing the php script that uses tsearch2, with practically no disk accesses) Regards, Marinos -- Dipl.-Ing. Marinos Yannikos, CEO Preisvergleich Internet Services AG Obere Donaustraße 63/2, A-1020 Wien Tel./Fax: (+431) 5811609-52/-55
"Marinos J. Yannikos" <mjy@geizhals.at> writes: > according to > http://www.postgresql.org/docs/8.0/interactive/limitations.html , > concurrent access to GiST indexes isn't possible at the moment. I > haven't read the thesis mentioned there, but I presume that concurrent > read access is also impossible. You presume wrong ... regards, tom lane
> It seems to be a big problem with tsearch2, when multiple clients are > hammering the db (we have a quad opteron box here that stays 75% idle > despite an apachebench with concurrency 10 stressing the php script that > uses tsearch2, with practically no disk accesses) Concurrency with READs is fine - but you can only have one WRITE going at once. Chris
On Thu, 3 Feb 2005, Marinos J. Yannikos wrote: > Hi, > > according to http://www.postgresql.org/docs/8.0/interactive/limitations.html > , concurrent access to GiST indexes isn't possible at the moment. I haven't > read the thesis mentioned there, but I presume that concurrent read access is > also impossible. Is there any workaround for this, esp. if the index is > usually only read and not written to? there are should no problem with READ access. > > It seems to be a big problem with tsearch2, when multiple clients are > hammering the db (we have a quad opteron box here that stays 75% idle despite > an apachebench with concurrency 10 stressing the php script that uses > tsearch2, with practically no disk accesses) I'm willing to see some details: version, query, explain analyze. > > Regards, > Marinos > Regards, Oleg _____________________________________________________________ Oleg Bartunov, sci.researcher, hostmaster of AstroNet, Sternberg Astronomical Institute, Moscow University (Russia) Internet: oleg@sai.msu.su, http://www.sai.msu.su/~megera/ phone: +007(095)939-16-83, +007(095)939-23-83
Oleg Bartunov wrote:
> On Thu, 3 Feb 2005, Marinos J. Yannikos wrote:
>> concurrent access to GiST indexes isn't possible at the moment. I [...]
>
> there are should no problem with READ access.
OK, thanks everyone (perhaps it would make sense to clarify this in the
manual).
> I'm willing to see some details: version, query, explain analyze.
8.0.0
Query while the box is idle:
explain analyze select count(*) from fr_offer o, fr_merchant m where
idxfti @@ to_tsquery('ranz & mc') and eur >= 70 and m.m_id=o.m_id;
Aggregate (cost=2197.48..2197.48 rows=1 width=0) (actual
time=88.052..88.054 rows=1 loops=1)
-> Merge Join (cost=2157.42..2196.32 rows=461 width=0) (actual
time=88.012..88.033 rows=3 loops=1)
Merge Cond: ("outer".m_id = "inner".m_id)
-> Index Scan using fr_merchant_pkey on fr_merchant m
(cost=0.00..29.97 rows=810 width=4) (actual time=0.041..1.233 rows=523
loops=1)
-> Sort (cost=2157.42..2158.57 rows=461 width=4) (actual
time=85.779..85.783 rows=3 loops=1)
Sort Key: o.m_id
-> Index Scan using idxfti_idx on fr_offer o
(cost=0.00..2137.02 rows=461 width=4) (actual time=77.957..85.754 rows=3
loops=1)
Index Cond: (idxfti @@ '\'ranz\' & \'mc\''::tsquery)
Filter: (eur >= 70::double precision)
Total runtime: 88.131 ms
now, while using apachebench (-c10), "top" says this:
Cpu0 : 15.3% us, 10.0% sy, 0.0% ni, 74.7% id, 0.0% wa, 0.0% hi, 0.0% si
Cpu1 : 13.3% us, 11.6% sy, 0.0% ni, 75.1% id, 0.0% wa, 0.0% hi, 0.0% si
Cpu2 : 16.9% us, 9.6% sy, 0.0% ni, 73.4% id, 0.0% wa, 0.0% hi, 0.0% si
Cpu3 : 18.7% us, 14.0% sy, 0.0% ni, 67.0% id, 0.0% wa, 0.0% hi, 0.3% si
(this is with shared_buffers = 2000; a larger setting makes almost no
difference for overall performance: although according to "top" system
time goes to ~0 and user time to ~25%, the system still stays 70-75% idle)
vmstat:
r b swpd free buff cache si so bi bo in cs us
sy id wa
2 0 0 8654316 64908 4177136 0 0 56 35 279 286 5
1 94 0
2 0 0 8646188 64908 4177136 0 0 0 0 1156 2982 15
10 75 0
2 0 0 8658412 64908 4177136 0 0 0 0 1358 3098 19
11 70 0
1 0 0 8646508 64908 4177136 0 0 0 104 1145 2070 13
12 75 0
so the script's execution speed is apparently not limited by the CPUs.
The query execution times go up like this while apachebench is running
(and the system is 75% idle):
Aggregate (cost=2197.48..2197.48 rows=1 width=0) (actual
time=952.661..952.663 rows=1 loops=1)
-> Merge Join (cost=2157.42..2196.32 rows=461 width=0) (actual
time=952.621..952.641 rows=3 loops=1)
Merge Cond: ("outer".m_id = "inner".m_id)
-> Index Scan using fr_merchant_pkey on fr_merchant m
(cost=0.00..29.97 rows=810 width=4) (actual time=2.078..3.338 rows=523
loops=1)
-> Sort (cost=2157.42..2158.57 rows=461 width=4) (actual
time=948.345..948.348 rows=3 loops=1)
Sort Key: o.m_id
-> Index Scan using idxfti_idx on fr_offer o
(cost=0.00..2137.02 rows=461 width=4) (actual time=875.643..948.301
rows=3 loops=1)
Index Cond: (idxfti @@ '\'ranz\' & \'mc\''::tsquery)
Filter: (eur >= 70::double precision)
Total runtime: 952.764 ms
I can't seem to find out where the bottleneck is, but it doesn't seem to
be CPU or disk. "top" shows that postgres processes are frequently in
this state:
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ WCHAN
COMMAND
6701 postgres 16 0 204m 58m 56m S 9.3 0.2 0:06.96 semtimedo
^^^^^^^^^
postmaste
Any hints are appreciated...
Regards,
Marinos
--
Dipl.-Ing. Marinos Yannikos, CEO
Preisvergleich Internet Services AG
Obere Donaustraße 63/2, A-1020 Wien
Tel./Fax: (+431) 5811609-52/-55
Do you have anything performing any updates or inserts to this table,
even if it does not update the gist column, even if it does not update
anything ?
Marinos,
what if you construct "apachebench & Co" free script and see if
the issue still exists. There are could be many issues doesn't
connected to postgresql and tsearch2.
Oleg
On Thu, 3 Feb 2005, Marinos J. Yannikos wrote:
> Oleg Bartunov wrote:
>> On Thu, 3 Feb 2005, Marinos J. Yannikos wrote:
>>> concurrent access to GiST indexes isn't possible at the moment. I [...]
>>
>> there are should no problem with READ access.
>
> OK, thanks everyone (perhaps it would make sense to clarify this in the
> manual).
>
>> I'm willing to see some details: version, query, explain analyze.
>
> 8.0.0
>
> Query while the box is idle:
>
> explain analyze select count(*) from fr_offer o, fr_merchant m where idxfti
> @@ to_tsquery('ranz & mc') and eur >= 70 and m.m_id=o.m_id;
>
> Aggregate (cost=2197.48..2197.48 rows=1 width=0) (actual time=88.052..88.054
> rows=1 loops=1)
> -> Merge Join (cost=2157.42..2196.32 rows=461 width=0) (actual
> time=88.012..88.033 rows=3 loops=1)
> Merge Cond: ("outer".m_id = "inner".m_id)
> -> Index Scan using fr_merchant_pkey on fr_merchant m
> (cost=0.00..29.97 rows=810 width=4) (actual time=0.041..1.233 rows=523
> loops=1)
> -> Sort (cost=2157.42..2158.57 rows=461 width=4) (actual
> time=85.779..85.783 rows=3 loops=1)
> Sort Key: o.m_id
> -> Index Scan using idxfti_idx on fr_offer o
> (cost=0.00..2137.02 rows=461 width=4) (actual time=77.957..85.754 rows=3
> loops=1)
> Index Cond: (idxfti @@ '\'ranz\' & \'mc\''::tsquery)
> Filter: (eur >= 70::double precision)
>
> Total runtime: 88.131 ms
>
> now, while using apachebench (-c10), "top" says this:
>
> Cpu0 : 15.3% us, 10.0% sy, 0.0% ni, 74.7% id, 0.0% wa, 0.0% hi, 0.0% si
> Cpu1 : 13.3% us, 11.6% sy, 0.0% ni, 75.1% id, 0.0% wa, 0.0% hi, 0.0% si
> Cpu2 : 16.9% us, 9.6% sy, 0.0% ni, 73.4% id, 0.0% wa, 0.0% hi, 0.0% si
> Cpu3 : 18.7% us, 14.0% sy, 0.0% ni, 67.0% id, 0.0% wa, 0.0% hi, 0.3% si
>
> (this is with shared_buffers = 2000; a larger setting makes almost no
> difference for overall performance: although according to "top" system time
> goes to ~0 and user time to ~25%, the system still stays 70-75% idle)
>
> vmstat:
>
> r b swpd free buff cache si so bi bo in cs us sy id
> wa
> 2 0 0 8654316 64908 4177136 0 0 56 35 279 286 5 1 94
> 0
> 2 0 0 8646188 64908 4177136 0 0 0 0 1156 2982 15 10 75
> 0
> 2 0 0 8658412 64908 4177136 0 0 0 0 1358 3098 19 11 70
> 0
> 1 0 0 8646508 64908 4177136 0 0 0 104 1145 2070 13 12 75
> 0
>
> so the script's execution speed is apparently not limited by the CPUs.
>
> The query execution times go up like this while apachebench is running (and
> the system is 75% idle):
>
> Aggregate (cost=2197.48..2197.48 rows=1 width=0) (actual
> time=952.661..952.663 rows=1 loops=1)
> -> Merge Join (cost=2157.42..2196.32 rows=461 width=0) (actual
> time=952.621..952.641 rows=3 loops=1)
> Merge Cond: ("outer".m_id = "inner".m_id)
> -> Index Scan using fr_merchant_pkey on fr_merchant m
> (cost=0.00..29.97 rows=810 width=4) (actual time=2.078..3.338 rows=523
> loops=1)
> -> Sort (cost=2157.42..2158.57 rows=461 width=4) (actual
> time=948.345..948.348 rows=3 loops=1)
> Sort Key: o.m_id
> -> Index Scan using idxfti_idx on fr_offer o
> (cost=0.00..2137.02 rows=461 width=4) (actual time=875.643..948.301 rows=3
> loops=1)
> Index Cond: (idxfti @@ '\'ranz\' & \'mc\''::tsquery)
> Filter: (eur >= 70::double precision)
> Total runtime: 952.764 ms
>
> I can't seem to find out where the bottleneck is, but it doesn't seem to be
> CPU or disk. "top" shows that postgres processes are frequently in this
> state:
>
> PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ WCHAN COMMAND
> 6701 postgres 16 0 204m 58m 56m S 9.3 0.2 0:06.96 semtimedo
> ^^^^^^^^^
> postmaste
>
> Any hints are appreciated...
>
> Regards,
> Marinos
>
Regards,
Oleg
_____________________________________________________________
Oleg Bartunov, sci.researcher, hostmaster of AstroNet,
Sternberg Astronomical Institute, Moscow University (Russia)
Internet: oleg@sai.msu.su, http://www.sai.msu.su/~megera/
phone: +007(095)939-16-83, +007(095)939-23-83
Oleg Bartunov wrote:
> Marinos,
>
> what if you construct "apachebench & Co" free script and see if
> the issue still exists. There are could be many issues doesn't
> connected to postgresql and tsearch2.
>
Yes, the problem persists - I wrote a small perl script that forks 10
chils processes and executes the same queries in parallel without any
php/apachebench involved:
--- 8< ---
#!/usr/bin/perl
use DBI;
$n=10;
$nq=100;
$sql="select count(*) from fr_offer o, fr_merchant m where idxfti @@
to_tsquery('ranz & mc') and eur >= 70 and m.m_id=o.m_id;";
sub reaper { my $waitedpid = wait; $running--; $SIG{CHLD} = \&reaper; }
$SIG{CHLD} = \&reaper;
for $i (1..$n)
{
if (fork() > 0) { $running++; }
else
{
my
$dbh=DBI->connect('dbi:Pg:host=daedalus;dbname=<censored>','root','',{
AutoCommit => 1 }) || die "!db";
for my $j (1..$nq)
{
my $sth=$dbh->prepare($sql);
$r=$sth->execute() or print STDERR $dbh->errstr();
}
exit 0;
}
}
while ($running > 0)
{
sleep 1;
print "Running: $running\n";
}
--- >8 ---
Result (now with shared_buffers = 20000, hence less system and more user
time):
Cpu0 : 25.1% us, 0.0% sy, 0.0% ni, 74.9% id, 0.0% wa, 0.0% hi, 0.0% si
Cpu1 : 18.3% us, 0.0% sy, 0.0% ni, 81.7% id, 0.0% wa, 0.0% hi, 0.0% si
Cpu2 : 27.8% us, 0.3% sy, 0.0% ni, 71.9% id, 0.0% wa, 0.0% hi, 0.0% si
Cpu3 : 23.5% us, 0.3% sy, 0.0% ni, 75.9% id, 0.0% wa, 0.0% hi, 0.3% si
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ WCHAN
COMMAND
7571 postgres 16 0 204m 62m 61m R 10.6 0.2 0:01.97 -
postmaste
7583 postgres 16 0 204m 62m 61m S 9.6 0.2 0:02.06 semtimedo
postmaste
7586 postgres 16 0 204m 62m 61m S 9.6 0.2 0:02.00 semtimedo
postmaste
7575 postgres 16 0 204m 62m 61m S 9.3 0.2 0:02.12 semtimedo
postmaste
7578 postgres 16 0 204m 62m 61m R 9.3 0.2 0:02.05 -
postmaste
i.e., virtually no difference. With 1000 queries and 10 in parallel, the
apachebench run takes 60.674 seconds and the perl script 59.392 seconds.
Regards,
Marinos
--
Dipl.-Ing. Marinos Yannikos, CEO
Preisvergleich Internet Services AG
Obere Donaustraße 63/2, A-1020 Wien
Tel./Fax: (+431) 5811609-52/-55
"Marinos J. Yannikos" <mjy@geizhals.at> writes:
> I can't seem to find out where the bottleneck is, but it doesn't seem to
> be CPU or disk. "top" shows that postgres processes are frequently in
> this state:
> 6701 postgres 16 0 204m 58m 56m S 9.3 0.2 0:06.96 semtimedo
> ^^^^^^^^^
What's the platform exactly (hardware and OS)?
regards, tom lane
Tom Lane schrieb: > What's the platform exactly (hardware and OS)? Hardware: http://www.appro.com/product/server_1142h.asp - SCSI version, 2 x 146GB 10k rpm disks in software RAID-1 - 32GB RAM OS: Linux 2.6.10-rc3, x86_64, debian GNU/Linux distribution - CONFIG_K8_NUMA is currently turned off (no change, but now all CPUs have ~25% load, previously one was 100% busy and the others idle) - CONFIG_GART_IOMMU=y (but no change, tried both settings) [other kernel options didn't seem to be relevant for tweaking at the moment, mostly they're "safe defaults"] The PostgreSQL data directory is on an ext2 filesystem. Regards, Marinos -- Dipl.-Ing. Marinos Yannikos, CEO Preisvergleich Internet Services AG Obere Donaustrasse 63, A-1020 Wien Tel./Fax: (+431) 5811609-52/-55
On Thu, 3 Feb 2005, Tom Lane wrote:
> "Marinos J. Yannikos" <mjy@geizhals.at> writes:
>> I can't seem to find out where the bottleneck is, but it doesn't seem to
>> be CPU or disk. "top" shows that postgres processes are frequently in
>> this state:
>
>> 6701 postgres 16 0 204m 58m 56m S 9.3 0.2 0:06.96 semtimedo
>> ^^^^^^^^^
>
> What's the platform exactly (hardware and OS)?
>
it should be 'semtimedop'
> regards, tom lane
>
Regards,
Oleg
_____________________________________________________________
Oleg Bartunov, sci.researcher, hostmaster of AstroNet,
Sternberg Astronomical Institute, Moscow University (Russia)
Internet: oleg@sai.msu.su, http://www.sai.msu.su/~megera/
phone: +007(095)939-16-83, +007(095)939-23-83
Oleg Bartunov schrieb: > Marinos, > > what if you construct "apachebench & Co" free script and see if > the issue still exists. There are could be many issues doesn't > connected to postgresql and tsearch2. > Some more things I tried: - data directory on ramdisk (tmpfs) - no effect - database connections either over Unix domain sockets or TCP - no effect - CLUSTER on gist index - approx. 20% faster queries, but CPU usage still hovers around 25% (75% idle) - preemptible kernel - no effect This is really baffling me, it looks like a kernel issue of some sort (I'm only guessing though). I found this old posting: http://archives.postgresql.org/pgsql-general/2001-12/msg00836.php - is this still applicable? I don't see an unusually high number of context switches, but the processes seem to be spending some time in "semtimedop" (even though the TAS assembly macros are definetely being compiled-in). If you are interested, I can probably provide an account on one of our identically configured boxes by Monday afternoon (GMT+1) with the same database and benchmarking utility. Regards, Marinos
Marinos Yannikos <mjy@geizhals.at> writes: > This is really baffling me, it looks like a kernel issue of some sort > (I'm only guessing though). I found this old posting: > http://archives.postgresql.org/pgsql-general/2001-12/msg00836.php - is > this still applicable? That seems to be an early report of what we now recognize as the "context swap storm" problem, and no we don't have a solution yet. I'm not completely convinced that you're seeing the same thing, but if you're seeing a whole lot of semops then it could well be. I set up a test case consisting of two backends running the same tsearch2 query over and over --- nothing fancy, just one of the ones from the tsearch2 regression test: SELECT count(*) FROM test_tsvector WHERE a @@ to_tsquery('345&qwerty'); I used gdb to set breakpoints at PGSemaphoreLock and PGSemaphoreTryLock, which are the only two functions that can possibly block on a semop call. On a single-processor machine, I saw maybe one hit every couple of seconds, all coming from contention for the BufMgrLock or sometimes the LockMgrLock. So unless I've missed something, there's not anything in tsearch2 or gist per se that is causing lock conflicts. You said you're testing a quad-processor machine, so it could be that you're seeing the same lock contention issues that we've been trying to figure out for the past year ... regards, tom lane
Marinos Yannikos <mjy@geizhals.at> writes:
> Some more things I tried:
You might try the attached patch (which I just applied to HEAD).
It cuts down the number of acquisitions of the BufMgrLock by merging
adjacent bufmgr calls during a GIST index search. I'm not hugely
hopeful that this will help, since I did something similar to btree
last spring without much improvement for context swap storms involving
btree searches ... but it seems worth trying.
regards, tom lane
*** src/backend/access/gist/gistget.c.orig Fri Dec 31 17:45:27 2004
--- src/backend/access/gist/gistget.c Sat Feb 5 14:19:52 2005
***************
*** 60,69 ****
BlockNumber blk;
IndexTuple it;
b = ReadBuffer(s->indexRelation, GISTP_ROOT);
p = BufferGetPage(b);
po = (GISTPageOpaque) PageGetSpecialPointer(p);
- so = (GISTScanOpaque) s->opaque;
for (;;)
{
--- 60,70 ----
BlockNumber blk;
IndexTuple it;
+ so = (GISTScanOpaque) s->opaque;
+
b = ReadBuffer(s->indexRelation, GISTP_ROOT);
p = BufferGetPage(b);
po = (GISTPageOpaque) PageGetSpecialPointer(p);
for (;;)
{
***************
*** 75,86 ****
while (n < FirstOffsetNumber || n > maxoff)
{
! ReleaseBuffer(b);
! if (so->s_stack == NULL)
return false;
! stk = so->s_stack;
! b = ReadBuffer(s->indexRelation, stk->gs_blk);
p = BufferGetPage(b);
po = (GISTPageOpaque) PageGetSpecialPointer(p);
maxoff = PageGetMaxOffsetNumber(p);
--- 76,89 ----
while (n < FirstOffsetNumber || n > maxoff)
{
! stk = so->s_stack;
! if (stk == NULL)
! {
! ReleaseBuffer(b);
return false;
+ }
! b = ReleaseAndReadBuffer(b, s->indexRelation, stk->gs_blk);
p = BufferGetPage(b);
po = (GISTPageOpaque) PageGetSpecialPointer(p);
maxoff = PageGetMaxOffsetNumber(p);
***************
*** 89,94 ****
--- 92,98 ----
n = OffsetNumberPrev(stk->gs_child);
else
n = OffsetNumberNext(stk->gs_child);
+
so->s_stack = stk->gs_parent;
pfree(stk);
***************
*** 116,123 ****
it = (IndexTuple) PageGetItem(p, PageGetItemId(p, n));
blk = ItemPointerGetBlockNumber(&(it->t_tid));
! ReleaseBuffer(b);
! b = ReadBuffer(s->indexRelation, blk);
p = BufferGetPage(b);
po = (GISTPageOpaque) PageGetSpecialPointer(p);
}
--- 120,126 ----
it = (IndexTuple) PageGetItem(p, PageGetItemId(p, n));
blk = ItemPointerGetBlockNumber(&(it->t_tid));
! b = ReleaseAndReadBuffer(b, s->indexRelation, blk);
p = BufferGetPage(b);
po = (GISTPageOpaque) PageGetSpecialPointer(p);
}
***************
*** 137,142 ****
--- 140,147 ----
BlockNumber blk;
IndexTuple it;
+ so = (GISTScanOpaque) s->opaque;
+
blk = ItemPointerGetBlockNumber(&(s->currentItemData));
n = ItemPointerGetOffsetNumber(&(s->currentItemData));
***************
*** 148,154 ****
b = ReadBuffer(s->indexRelation, blk);
p = BufferGetPage(b);
po = (GISTPageOpaque) PageGetSpecialPointer(p);
- so = (GISTScanOpaque) s->opaque;
for (;;)
{
--- 153,158 ----
***************
*** 157,176 ****
while (n < FirstOffsetNumber || n > maxoff)
{
! ReleaseBuffer(b);
! if (so->s_stack == NULL)
return false;
! stk = so->s_stack;
! b = ReadBuffer(s->indexRelation, stk->gs_blk);
p = BufferGetPage(b);
- maxoff = PageGetMaxOffsetNumber(p);
po = (GISTPageOpaque) PageGetSpecialPointer(p);
if (ScanDirectionIsBackward(dir))
n = OffsetNumberPrev(stk->gs_child);
else
n = OffsetNumberNext(stk->gs_child);
so->s_stack = stk->gs_parent;
pfree(stk);
--- 161,183 ----
while (n < FirstOffsetNumber || n > maxoff)
{
! stk = so->s_stack;
! if (stk == NULL)
! {
! ReleaseBuffer(b);
return false;
+ }
! b = ReleaseAndReadBuffer(b, s->indexRelation, stk->gs_blk);
p = BufferGetPage(b);
po = (GISTPageOpaque) PageGetSpecialPointer(p);
+ maxoff = PageGetMaxOffsetNumber(p);
if (ScanDirectionIsBackward(dir))
n = OffsetNumberPrev(stk->gs_child);
else
n = OffsetNumberNext(stk->gs_child);
+
so->s_stack = stk->gs_parent;
pfree(stk);
***************
*** 198,205 ****
it = (IndexTuple) PageGetItem(p, PageGetItemId(p, n));
blk = ItemPointerGetBlockNumber(&(it->t_tid));
! ReleaseBuffer(b);
! b = ReadBuffer(s->indexRelation, blk);
p = BufferGetPage(b);
po = (GISTPageOpaque) PageGetSpecialPointer(p);
--- 205,211 ----
it = (IndexTuple) PageGetItem(p, PageGetItemId(p, n));
blk = ItemPointerGetBlockNumber(&(it->t_tid));
! b = ReleaseAndReadBuffer(b, s->indexRelation, blk);
p = BufferGetPage(b);
po = (GISTPageOpaque) PageGetSpecialPointer(p);
Tom Lane wrote: > You might try the attached patch (which I just applied to HEAD). > It cuts down the number of acquisitions of the BufMgrLock by merging > adjacent bufmgr calls during a GIST index search. [...] Thanks - I applied it successfully against 8.0.0, but it didn't seem to have a noticeable effect. I'm still seeing more or less exactly 25% CPU usage by postgres processes and identical query times (measured with the Perl script I posted earlier). Regards, Marinos -- Dipl.-Ing. Marinos Yannikos, CEO Preisvergleich Internet Services AG Obere Donaustrasse 63, A-1020 Wien Tel./Fax: (+431) 5811609-52/-55
Tom Lane wrote: > I'm not completely convinced that you're seeing the same thing, > but if you're seeing a whole lot of semops then it could well be. I'm seeing ~280 semops/second with spinlocks enabled and ~80k semops/second (> 4 mil. for 100 queries) with --disable-spinlocks, which increases total run time by ~20% only. In both cases, cpu usage stays around 25%, which is a bit odd. > [...]You said > you're testing a quad-processor machine, so it could be that you're > seeing the same lock contention issues that we've been trying to figure > out for the past year ... Are those issues specific to a particular platform (only x86/Linux?) or is it a problem with SMP systems in general? I guess I'll be following the current discussion on -hackers closely... Regards, Marinos
On Sat, 2005-02-05 at 14:42 -0500, Tom Lane wrote: > Marinos Yannikos <mjy@geizhals.at> writes: > > Some more things I tried: > > You might try the attached patch (which I just applied to HEAD). > It cuts down the number of acquisitions of the BufMgrLock by merging > adjacent bufmgr calls during a GIST index search. I'm not sure it will help much either, but there is more low-hanging fruit in this area: GiST currently does a ReadBuffer() for each tuple produced by the index scan, which is grossly inefficient. I recently applied a patch to change rtree to keep a pin on the scan's current buffer in between invocations of the index scan API (which is how btree and hash already work), and it improved performance by about 10% (according to contrib/rtree_gist's benchmark). I've made similar changes for GiST, but unfortunately it is part of a larger GiST improvement patch that I haven't had a chance to commit to 8.1 yet: http://archives.postgresql.org/pgsql-patches/2004-11/msg00144.php I'll try and get this cleaned up for application to HEAD next week. -Neil