Обсуждение: pg_restore --clean text

Поиск
Список
Период
Сортировка

pg_restore --clean text

От
"Erik Rijkers"
Дата:
The help text for the pg_restore --clean option in the documentation is IMHO more precise than the
text that the pg_restore binary gives:

documentation:-c--clean  Clean (drop) database objects before recreating them.

pg_restore binary:  -c, --clean   clean (drop) schema prior to create


So I think it would be an improvement to channge the pg_restore --help text:


*** src/bin/pg_dump/pg_restore.c.orig   2008-12-27 01:16:23.000000000 +0100
--- src/bin/pg_dump/pg_restore.c        2008-12-27 01:29:53.000000000 +0100
***************
*** 385,391 ****
       printf(_("\nOptions controlling the restore:\n"));       printf(_("  -a, --data-only          restore only the
data,no schema\n"));
 
!       printf(_("  -c, --clean              clean (drop) schema prior to create\n"));       printf(_("  -C, --create
         create the target database\n"));       printf(_("  -I, --index=NAME         restore named index\n"));
printf(_(" -L, --use-list=FILENAME  use specified table of contents for ordering\n"
 
--- 385,391 ----
       printf(_("\nOptions controlling the restore:\n"));       printf(_("  -a, --data-only          restore only the
data,no schema\n"));
 
!       printf(_("  -c, --clean              clean (drop) database objects prior to creating
them\n"));       printf(_("  -C, --create             create the target database\n"));       printf(_("  -I,
--index=NAME        restore named index\n"));       printf(_("  -L, --use-list=FILENAME  use specified table of
contentsfor ordering\n"
 



thanks,

Erik Rijkers




Re: pg_restore --clean text

От
Bruce Momjian
Дата:
Erik Rijkers wrote:
> The help text for the pg_restore --clean option in the documentation is IMHO more precise than the
> text that the pg_restore binary gives:
>
> documentation:
>  -c
>  --clean
>    Clean (drop) database objects before recreating them.
>
> pg_restore binary:
>    -c, --clean   clean (drop) schema prior to create
>
>
> So I think it would be an improvement to channge the pg_restore --help text:

I used the wording from the pg_restore SGML manual page in the --help
text, to be more consistent.  Thanks for the report.

--
  Bruce Momjian  <bruce@momjian.us>        http://momjian.us
  EnterpriseDB                             http://enterprisedb.com

  + If your life is a hard drive, Christ can be your backup. +
Index: src/bin/pg_dump/pg_restore.c
===================================================================
RCS file: /cvsroot/pgsql/src/bin/pg_dump/pg_restore.c,v
retrieving revision 1.90
diff -c -c -r1.90 pg_restore.c
*** src/bin/pg_dump/pg_restore.c    5 Jan 2009 16:54:37 -0000    1.90
--- src/bin/pg_dump/pg_restore.c    6 Jan 2009 17:17:10 -0000
***************
*** 391,397 ****

      printf(_("\nOptions controlling the restore:\n"));
      printf(_("  -a, --data-only          restore only the data, no schema\n"));
!     printf(_("  -c, --clean              clean (drop) schema prior to create\n"));
      printf(_("  -C, --create             create the target database\n"));
      printf(_("  -I, --index=NAME         restore named index\n"));
      printf(_("  -L, --use-list=FILENAME  use specified table of contents for ordering\n"
--- 391,397 ----

      printf(_("\nOptions controlling the restore:\n"));
      printf(_("  -a, --data-only          restore only the data, no schema\n"));
!     printf(_("  -c, --clean              clean (drop) database objects before recreating\n"));
      printf(_("  -C, --create             create the target database\n"));
      printf(_("  -I, --index=NAME         restore named index\n"));
      printf(_("  -L, --use-list=FILENAME  use specified table of contents for ordering\n"

Re: pg_restore --clean text

От
Tom Lane
Дата:
Bruce Momjian <bruce@momjian.us> writes:
> I used the wording from the pg_restore SGML manual page in the --help
> text, to be more consistent.  Thanks for the report.

pg_dump has the same wording.  pg_dumpall might need adjustment too,
though I'm not sure (note its --clean acts on DBs not individual
objects)
        regards, tom lane


Re: pg_restore --clean text

От
Bruce Momjian
Дата:
Tom Lane wrote:
> Bruce Momjian <bruce@momjian.us> writes:
> > I used the wording from the pg_restore SGML manual page in the --help
> > text, to be more consistent.  Thanks for the report.
>
> pg_dump has the same wording.  pg_dumpall might need adjustment too,
> though I'm not sure (note its --clean acts on DBs not individual
> objects)

OK, done with attached patch.

--
  Bruce Momjian  <bruce@momjian.us>        http://momjian.us
  EnterpriseDB                             http://enterprisedb.com

  + If your life is a hard drive, Christ can be your backup. +
Index: src/bin/pg_dump/pg_dump.c
===================================================================
RCS file: /cvsroot/pgsql/src/bin/pg_dump/pg_dump.c,v
retrieving revision 1.512
diff -c -c -r1.512 pg_dump.c
*** src/bin/pg_dump/pg_dump.c    5 Jan 2009 16:54:37 -0000    1.512
--- src/bin/pg_dump/pg_dump.c    6 Jan 2009 18:01:06 -0000
***************
*** 803,809 ****
      printf(_("\nOptions controlling the output content:\n"));
      printf(_("  -a, --data-only             dump only the data, not the schema\n"));
      printf(_("  -b, --blobs                 include large objects in dump\n"));
!     printf(_("  -c, --clean                 clean (drop) schema prior to create\n"));
      printf(_("  -C, --create                include commands to create database in dump\n"));
      printf(_("  -d, --inserts               dump data as INSERT commands, rather than COPY\n"));
      printf(_("  -D, --column-inserts        dump data as INSERT commands with column names\n"));
--- 803,809 ----
      printf(_("\nOptions controlling the output content:\n"));
      printf(_("  -a, --data-only             dump only the data, not the schema\n"));
      printf(_("  -b, --blobs                 include large objects in dump\n"));
!     printf(_("  -c, --clean                 clean (drop) database objects before recreating\n"));
      printf(_("  -C, --create                include commands to create database in dump\n"));
      printf(_("  -d, --inserts               dump data as INSERT commands, rather than COPY\n"));
      printf(_("  -D, --column-inserts        dump data as INSERT commands with column names\n"));
Index: src/bin/pg_dump/pg_dumpall.c
===================================================================
RCS file: /cvsroot/pgsql/src/bin/pg_dump/pg_dumpall.c,v
retrieving revision 1.111
diff -c -c -r1.111 pg_dumpall.c
*** src/bin/pg_dump/pg_dumpall.c    5 Jan 2009 16:54:37 -0000    1.111
--- src/bin/pg_dump/pg_dumpall.c    6 Jan 2009 18:01:07 -0000
***************
*** 500,506 ****
               "                           fail after waiting TIMEOUT for a table lock\n"));
      printf(_("\nOptions controlling the output content:\n"));
      printf(_("  -a, --data-only          dump only the data, not the schema\n"));
!     printf(_("  -c, --clean              clean (drop) databases prior to create\n"));
      printf(_("  -d, --inserts            dump data as INSERT, rather than COPY, commands\n"));
      printf(_("  -D, --column-inserts     dump data as INSERT commands with column names\n"));
      printf(_("  -g, --globals-only       dump only global objects, no databases\n"));
--- 500,506 ----
               "                           fail after waiting TIMEOUT for a table lock\n"));
      printf(_("\nOptions controlling the output content:\n"));
      printf(_("  -a, --data-only          dump only the data, not the schema\n"));
!     printf(_("  -c, --clean              clean (drop) databases before recreating\n"));
      printf(_("  -d, --inserts            dump data as INSERT, rather than COPY, commands\n"));
      printf(_("  -D, --column-inserts     dump data as INSERT commands with column names\n"));
      printf(_("  -g, --globals-only       dump only global objects, no databases\n"));