Re: 8.2.4 serious slowdown

> Perhaps a suboptimal plan is picked due to configuration issues, e.g.
> memory constraints? Could you post your postgresql.conf as well?

Below is the postgresql.conf file for 8.2.4. The server has 2 GB of RAM and it was not maxed out when I ran the query.
As I mentioned, I tried running both 8.0.11 and 8.2.4 on the same hardware, so that I would see if it was a difference
inthe hardware or the database. 

Sim


# -----------------------------
# PostgreSQL configuration file
# -----------------------------
#
# This file consists of lines of the form:
#
#   name = value
#
# (The '=' is optional.)  White space may be used.  Comments are introduced
# with '#' anywhere on a line.  The complete list of option names and
# allowed values can be found in the PostgreSQL documentation.  The
# commented-out settings shown in this file represent the default values.
#
# Please note that re-commenting a setting is NOT sufficient to revert it
# to the default value, unless you restart the server.
#
# Any option can also be given as a command line switch to the server,
# e.g., 'postgres -c log_connections=on'.  Some options can be changed at
# run-time with the 'SET' SQL command.
#
# This file is read on server startup and when the server receives a
# SIGHUP.  If you edit the file on a running system, you have to SIGHUP the
# server for the changes to take effect, or use "pg_ctl reload". Some
# settings, which are marked below, require a server shutdown and restart
# to take effect.
#
# Memory units:  kB = kilobytes MB = megabytes GB = gigabytes
# Time units:    ms = milliseconds s = seconds min = minutes h = hours d = days


#---------------------------------------------------------------------------
# FILE LOCATIONS
#---------------------------------------------------------------------------

# The default values of these variables are driven from the -D command line
# switch or PGDATA environment variable, represented here as ConfigDir.

#data_directory = 'ConfigDir'# use data in another directory
# (change requires restart)
#hba_file = 'ConfigDir/pg_hba.conf'# host-based authentication file
# (change requires restart)
#ident_file = 'ConfigDir/pg_ident.conf'# ident configuration file
# (change requires restart)

# If external_pid_file is not explicitly set, no extra PID file is written.
#external_pid_file = '(none)'# write an extra PID file
# (change requires restart)


#---------------------------------------------------------------------------
# CONNECTIONS AND AUTHENTICATION
#---------------------------------------------------------------------------

# - Connection Settings -

listen_addresses = '*'# what IP address(es) to listen on;
# comma-separated list of addresses;
# defaults to 'localhost', '*' = all
# (change requires restart)
#port = 5432# (change requires restart)
max_connections = 100# (change requires restart)
# Note: increasing max_connections costs ~400 bytes of shared memory per
# connection slot, plus lock space (see max_locks_per_transaction).  You
# might also need to raise shared_buffers to support more connections.
#superuser_reserved_connections = 3# (change requires restart)
#unix_socket_directory = ''# (change requires restart)
#unix_socket_group = ''# (change requires restart)
#unix_socket_permissions = 0777# octal
# (change requires restart)
#bonjour_name = ''# defaults to the computer name
# (change requires restart)

# - Security & Authentication -

#authentication_timeout = 1min# 1s-600s
#ssl = off# (change requires restart)
#password_encryption = on
#db_user_namespace = off

# Kerberos
#krb_server_keyfile = ''# (change requires restart)
#krb_srvname = 'postgres'# (change requires restart)
#krb_server_hostname = ''# empty string matches any keytab entry
# (change requires restart)
#krb_caseins_users = off# (change requires restart)

# - TCP Keepalives -
# see 'man 7 tcp' for details

#tcp_keepalives_idle = 0# TCP_KEEPIDLE, in seconds;
# 0 selects the system default
#tcp_keepalives_interval = 0# TCP_KEEPINTVL, in seconds;
# 0 selects the system default
#tcp_keepalives_count = 0# TCP_KEEPCNT;
# 0 selects the system default


#---------------------------------------------------------------------------
# RESOURCE USAGE (except WAL)
#---------------------------------------------------------------------------

# - Memory -

shared_buffers = 24MB# min 128kB or max_connections*16kB
# (change requires restart)
#temp_buffers = 8MB# min 800kB
#max_prepared_transactions = 5# can be 0 or more
# (change requires restart)
# Note: increasing max_prepared_transactions costs ~600 bytes of shared memory
# per transaction slot, plus lock space (see max_locks_per_transaction).
#work_mem = 1MB# min 64kB
#maintenance_work_mem = 16MB# min 1MB
#max_stack_depth = 2MB# min 100kB

# - Free Space Map -

max_fsm_pages = 153600# min max_fsm_relations*16, 6 bytes each
# (change requires restart)
#max_fsm_relations = 1000# min 100, ~70 bytes each
# (change requires restart)

# - Kernel Resource Usage -

#max_files_per_process = 1000# min 25
# (change requires restart)
#shared_preload_libraries = ''# (change requires restart)

# - Cost-Based Vacuum Delay -

#vacuum_cost_delay = 0# 0-1000 milliseconds
#vacuum_cost_page_hit = 1# 0-10000 credits
#vacuum_cost_page_miss = 10# 0-10000 credits
#vacuum_cost_page_dirty = 20# 0-10000 credits
#vacuum_cost_limit = 200# 0-10000 credits

# - Background writer -

#bgwriter_delay = 200ms# 10-10000ms between rounds
#bgwriter_lru_percent = 1.0# 0-100% of LRU buffers scanned/round
#bgwriter_lru_maxpages = 5# 0-1000 buffers max written/round
#bgwriter_all_percent = 0.333# 0-100% of all buffers scanned/round
#bgwriter_all_maxpages = 5# 0-1000 buffers max written/round


#---------------------------------------------------------------------------
# WRITE AHEAD LOG
#---------------------------------------------------------------------------

# - Settings -

#fsync = on# turns forced synchronization on or off
#wal_sync_method = fsync# the default is the first option
# supported by the operating system:
#   open_datasync
#   fdatasync
#   fsync
#   fsync_writethrough
#   open_sync
#full_page_writes = on# recover from partial page writes
#wal_buffers = 64kB# min 32kB
# (change requires restart)
#commit_delay = 0# range 0-100000, in microseconds
#commit_siblings = 5# range 1-1000

# - Checkpoints -

#checkpoint_segments = 3# in logfile segments, min 1, 16MB each
#checkpoint_timeout = 5min# range 30s-1h
#checkpoint_warning = 30s# 0 is off

# - Archiving -

#archive_command = ''# command to use to archive a logfile segment
#archive_timeout = 0# force a logfile segment switch after this
# many seconds; 0 is off


#---------------------------------------------------------------------------
# QUERY TUNING
#---------------------------------------------------------------------------

# - Planner Method Configuration -

#enable_bitmapscan = on
#enable_hashagg = on
#enable_hashjoin = on
#enable_indexscan = on
#enable_mergejoin = on
#enable_nestloop = on
#enable_seqscan = on
#enable_sort = on
#enable_tidscan = on

# - Planner Cost Constants -

#seq_page_cost = 1.0# measured on an arbitrary scale
#random_page_cost = 4.0# same scale as above
#cpu_tuple_cost = 0.01# same scale as above
#cpu_index_tuple_cost = 0.005# same scale as above
#cpu_operator_cost = 0.0025# same scale as above
#effective_cache_size = 128MB

# - Genetic Query Optimizer -

#geqo = on
#geqo_threshold = 12
#geqo_effort = 5# range 1-10
#geqo_pool_size = 0# selects default based on effort
#geqo_generations = 0# selects default based on effort
#geqo_selection_bias = 2.0# range 1.5-2.0

# - Other Planner Options -

#default_statistics_target = 10# range 1-1000
#constraint_exclusion = off
#from_collapse_limit = 8
#join_collapse_limit = 8# 1 disables collapsing of explicit
# JOINs


#---------------------------------------------------------------------------
# ERROR REPORTING AND LOGGING
#---------------------------------------------------------------------------

# - Where to Log -

#log_destination = 'stderr'# Valid values are combinations of
# stderr, syslog and eventlog,
# depending on platform.

# This is used when logging to stderr:
#redirect_stderr = off# Enable capturing of stderr into log
# files
# (change requires restart)

# These are only used if redirect_stderr is on:
#log_directory = 'pg_log'# Directory where log files are written
# Can be absolute or relative to PGDATA
#log_filename = 'postgresql-%Y-%m-%d_%H%M%S.log' # Log file name pattern.
# Can include strftime() escapes
#log_truncate_on_rotation = off # If on, any existing log file of the same
# name as the new log file will be
# truncated rather than appended to. But
# such truncation only occurs on
# time-driven rotation, not on restarts
# or size-driven rotation. Default is
# off, meaning append to existing files
# in all cases.
#log_rotation_age = 1d# Automatic rotation of logfiles will
# happen after that time.  0 to
# disable.
#log_rotation_size = 10MB# Automatic rotation of logfiles will
# happen after that much log
# output.  0 to disable.

# These are relevant when logging to syslog:
#syslog_facility = 'LOCAL0'
#syslog_ident = 'postgres'


# - When to Log -

#client_min_messages = notice# Values, in order of decreasing detail:
#   debug5
#   debug4
#   debug3
#   debug2
#   debug1
#   log
#   notice
#   warning
#   error

#log_min_messages = notice# Values, in order of decreasing detail:
#   debug5
#   debug4
#   debug3
#   debug2
#   debug1
#   info
#   notice
#   warning
#   error
#   log
#   fatal
#   panic

#log_error_verbosity = default# terse, default, or verbose messages

#log_min_error_statement = error# Values in order of increasing severity:
  #   debug5
#   debug4
#   debug3
#   debug2
#   debug1
  #   info
#   notice
#   warning
#   error
#   fatal
#   panic (effectively off)

#log_min_duration_statement = -1# -1 is disabled, 0 logs all statements
# and their durations.

#silent_mode = off# DO NOT USE without syslog or
# redirect_stderr
# (change requires restart)

# - What to Log -

#debug_print_parse = off
#debug_print_rewritten = off
#debug_print_plan = off
#debug_pretty_print = off
#log_connections = off
#log_disconnections = off
#log_duration = off
#log_line_prefix = ''# Special values:
#   %u = user name
#   %d = database name
#   %r = remote host and port
#   %h = remote host
#   %p = PID
#   %t = timestamp (no milliseconds)
#   %m = timestamp with milliseconds
#   %i = command tag
#   %c = session id
#   %l = session line number
#   %s = session start timestamp
#   %x = transaction id
#   %q = stop here in non-session
#        processes
#   %% = '%'
# e.g. '<%u%%%d> '
#log_statement = 'none'# none, ddl, mod, all
#log_hostname = off


#---------------------------------------------------------------------------
# RUNTIME STATISTICS
#---------------------------------------------------------------------------

# - Query/Index Statistics Collector -

#stats_command_string = on
#update_process_title = on

#stats_start_collector = on# needed for block or row stats
# (change requires restart)
#stats_block_level = off
stats_row_level = on
#stats_reset_on_server_start = off# (change requires restart)


# - Statistics Monitoring -

#log_parser_stats = off
#log_planner_stats = off
#log_executor_stats = off
#log_statement_stats = off


#---------------------------------------------------------------------------
# AUTOVACUUM PARAMETERS
#---------------------------------------------------------------------------

autovacuum = on# enable autovacuum subprocess?
# 'on' requires stats_start_collector
# and stats_row_level to also be on
#autovacuum_naptime = 1min# time between autovacuum runs
autovacuum_vacuum_threshold = 250# min # of tuple updates before
# vacuum
autovacuum_analyze_threshold = 125# min # of tuple updates before
# analyze
autovacuum_vacuum_scale_factor = 0.1# fraction of rel size before
# vacuum
autovacuum_analyze_scale_factor = 0.05# fraction of rel size before
# analyze
#autovacuum_freeze_max_age = 200000000# maximum XID age before forced vacuum
# (change requires restart)
#autovacuum_vacuum_cost_delay = -1# default vacuum cost delay for
# autovacuum, -1 means use
# vacuum_cost_delay
#autovacuum_vacuum_cost_limit = -1      # default vacuum cost limit for
                                         # autovacuum, -1 means use
                                         # vacuum_cost_limit


#---------------------------------------------------------------------------
# CLIENT CONNECTION DEFAULTS
#---------------------------------------------------------------------------

# - Statement Behavior -

#search_path = '"$user",public'         # schema names
#default_tablespace = ''                # a tablespace name, '' uses
                                         # the default
#check_function_bodies = on
#default_transaction_isolation = 'read committed'
#default_transaction_read_only = off
#statement_timeout = 0                  # 0 is disabled
#vacuum_freeze_min_age = 100000000

# - Locale and Formatting -

datestyle = 'iso, mdy'
#timezone = unknown                     # actually, defaults to TZ
                                         # environment setting
#timezone_abbreviations = 'Default'     # select the set of available timezone
                                         # abbreviations. Currently, there are
                                         #   Default
                                         #   Australia
                                         #   India
                                         # However you can also create your own
                                         # file in share/timezonesets/.
#extra_float_digits = 0                 # min -15, max 2
#client_encoding = sql_ascii            # actually, defaults to database
                                         # encoding

# These settings are initialized by initdb -- they might be changed
lc_messages = 'C'                       # locale for system error message
                                         # strings
lc_monetary = 'C'                       # locale for monetary formatting
lc_numeric = 'C'                        # locale for number formatting
lc_time = 'C'                           # locale for time formatting

# - Other Defaults -

#explain_pretty_print = on
#dynamic_library_path = '$libdir'
#local_preload_libraries = ''


#---------------------------------------------------------------------------
# LOCK MANAGEMENT
#---------------------------------------------------------------------------

#deadlock_timeout = 1s
#max_locks_per_transaction = 64         # min 10
                                         # (change requires restart)
# Note: each lock table slot uses ~270 bytes of shared memory, and there are
# max_locks_per_transaction * (max_connections + max_prepared_transactions)
# lock table slots.


#---------------------------------------------------------------------------
# VERSION/PLATFORM COMPATIBILITY
#---------------------------------------------------------------------------

# - Previous Postgres Versions -

add_missing_from = on
#array_nulls = on
#backslash_quote = safe_encoding        # on, off, or safe_encoding
#default_with_oids = off
#escape_string_warning = on
#standard_conforming_strings = off
#regex_flavor = advanced                # advanced, extended, or basic
#sql_inheritance = on

# - Other Platforms & Clients -

#transform_null_equals = off


#---------------------------------------------------------------------------
# CUSTOMIZED OPTIONS
#---------------------------------------------------------------------------

#custom_variable_classes = ''           # list of custom variable class names