Re: full_page_writes = off?

On Sat, 1 Dec 2007, Tomasz Ostrowski wrote:

> You can also use "hdparm -I" to check this - look for a "Write
> caching" in "Commands/features" section. If it has a "*" in front
> then it is enabled and dangerous.

Right; using -I works with most Linux hdparm versions:

# hdparm -V
hdparm v6.6
# hdparm -I /dev/hda | grep "Write cache"
            *    Write cache
# hdparm -W 0 /dev/hda

/dev/hda:
  setting drive write-caching to 0 (off)
# hdparm -I /dev/hda | grep "Write cache"
                 Write cache

While being able to check the state with -W only works in very recent
ones.

The best way to make this change permanent varies depending on your Linux
distribution.

Also:  nowadays many SATA disks appear as SCSI devices like /dev/sda.  In
some cases I believe you can use a recent hdparm on them anyway, in others
I've had to use sdparm instead.  Several of the examples at
http://sg.torque.net/sg/sdparm.html show how to manipulate the Write Cache
Enabled (WCE) status similarly to the above on SCSI devices.

> I don't know how to check it on BSD.

In FreeBSD I believe you use atacontrol to check the settings, and you can
make the changes permanent by fiddling with the /boot/device.hints file.

--
* Greg Smith gsmith@gregsmith.com http://www.gregsmith.com Baltimore, MD