Re: Finding bottleneck

Поиск
Список
Период
Сортировка
От Ron
Тема Re: Finding bottleneck
Дата
Msg-id 6.2.3.4.0.20050817001405.01fc3cd8@pop.earthlink.net
обсуждение исходный текст
Ответ на Finding bottleneck  (Kari Lavikka <tuner@bdb.fi>)
Список pgsql-performance
I think I have a solution for you.

You have posted that you presently have these RAID volumes and behaviors:
   sda: data (10 spindles, raid10)
   sdb: xlog & clog (2 spindles, raid1)
   sdc: os and other stuff

Usually iostat (2 second interval) says:
avg-cpu: %user  %nice  %sys  %iowait  %idle
               32.38    0.00   12.88    11.62    43.12

Device:       tps     kB_read/s    kB_wrtn/s    kB_read    kB_wrtn
   sda      202.00      1720.00         0.00           3440          0
   sdb      152.50         4.00         2724.00          8           5448
   sdc         0.00         0.00            0.00             0             0

And during checkpoint:
avg-cpu:  %user   %nice  %sys  %iowait  %idle
                31.25      0.00   14.75   54.00    0.00

Device:            tps    kB_read/s    kB_wrtn/s    kB_read    kB_wrtn
sda            3225.50      1562.00     35144.00       3124      70288
sdb             104.50        10.00      2348.00         20       4696
sdc               0.00         0.00         0.00          0          0


During checkpoints sda is becoming saturated, essentially halting all
other DB activity involving sda.  A lesser version of the porblem is
probably occurring every time multiple entities on sda are being
accessed simultaneously, particularly simultaneous writes.

My Proposed Solution:
Put comment and its index on it's own dedicated RAID volume.
Put comment_archive and its index on its own dedicated RAID volume.
Put the rest of the tables currently part of "data" on their own
dedicated RAID volume.
Put the rest if the indexes to the tables currently part of "data" on
their own dedicated RAID volume.
Put xlog on its own dedicated RAID volume.

The general idea here is to put any tables or indexes that tend to
require simultaneous access, particularly write access, on different
spindles.  Like all things, there's a point of diminishing returns
that is dependent on the HW used and the DB load.

If you must wring every last bit of IO out of the HD subsystem, a
more exact set of spindle assignments can be made by analyzing your
queries and then 1) make sure writes that tend to be simultaneous are
to different spindles, then (if you still need better IO) 2) make
sure reads that tend to be simultaneous are to different
spindles.  At some point, your controller will become the
bottleneck.  At some point beyond that, the IO channels on the
mainboard will become the bottleneck.

My suggestion should get you to within 80-90% of optimal if I've
understood the implications of your posts correctly.

The other suggestion I'd make is to bump your RAM from 16GB to 32GB
as soon as you can afford it and then tune your PostgreSQL parameters
to make best use of it.  The more RAM resident your DB, the better.

Hope this helps,
Ron Peacetree


===========Original Message Follows===========
From: Kari Lavikka <tuner ( at ) bdb ( dot ) fi>
To: Merlin Moncure <merlin ( dot ) moncure ( at ) rcsonline ( dot ) com>
Subject: Re: Finding bottleneck
Date: Mon, 8 Aug 2005 19:19:09 +0300 (EETDST)

----------

Actually I modified postgresql.conf a bit and there isn't commit
delay any more. That didn't make noticeable difference though..

Workload is generated by a website with about 1000 dynamic page views
a second. Finland's biggest site among youths btw.


Anyway, there are about 70 tables and here's some of the most important:
              relname              |  reltuples
----------------------------------+-------------
  comment                          | 1.00723e+08
  comment_archive                  | 9.12764e+07
  channel_comment                  | 6.93912e+06
  image                            | 5.80314e+06
  admin_event                      |  5.1936e+06
  user_channel                     | 3.36877e+06
  users                            |      325929
  channel                          |      252267

Queries to "comment" table are mostly IO-bound but are performing
quite well. Here's an example:
(SELECT u.nick, c.comment, c.private, c.admin, c.visible, c.parsable,
c.uid_sender, to_char(c.stamp, 'DD.MM.YY HH24:MI') AS stamp,
c.comment_id FROM comment c INNER JOIN users u ON u.uid =
c.uid_sender WHERE u.status = 'a' AND c.image_id = 15500900 AND
c.uid_target = 780345 ORDER BY uid_target DESC, image_id DESC,
c.comment_id DESC) LIMIT 36


And explain analyze:
  Limit  (cost=0.00..6.81 rows=1 width=103) (actual
time=0.263..17.522 rows=12 loops=1)
    ->  Nested Loop  (cost=0.00..6.81 rows=1 width=103) (actual
time=0.261..17.509 rows=12 loops=1)
          ->  Index Scan Backward using
comment_uid_target_image_id_comment_id_20050527 on "comment"
c  (cost=0.00..3.39 rows=1 width=92) (actual time=0.129..16.213
rows=12 loops=1)
                Index Cond: ((uid_target = 780345) AND (image_id = 15500900))
          ->  Index Scan using users_pkey on users
u  (cost=0.00..3.40 rows=1 width=15) (actual time=0.084..0.085 rows=1 loops=12)
                Index Cond: (u.uid = "outer".uid_sender)
                Filter: (status = 'a'::bpchar)
  Total runtime: 17.653 ms


We are having performance problems with some smaller tables and very
simple queries. For example:
SELECT u.uid, u.nick, extract(epoch from uc.stamp) AS stamp FROM
user_channel uc INNER JOIN users u USING (uid) WHERE channel_id =
281321 AND u.status = 'a' ORDER BY uc.channel_id, upper(uc.nick)


And explain analyze:
  Nested Loop  (cost=0.00..200.85 rows=35 width=48) (actual
time=0.414..38.128 rows=656 loops=1)
    ->  Index Scan using user_channel_channel_id_nick on user_channel
uc  (cost=0.00..40.18 rows=47 width=27) (actual time=0.090..0.866
rows=667 loops=1)
          Index Cond: (channel_id = 281321)
    ->  Index Scan using users_pkey on users u  (cost=0.00..3.40
rows=1 width=25) (actual time=0.048..0.051 rows=1 loops=667)
          Index Cond: ("outer".uid = u.uid)
          Filter: (status = 'a'::bpchar)
  Total runtime: 38.753 ms

Under heavy load these queries tend to take several minutes to
execute although there's plenty of free cpu available. There aren't
any blocking locks in pg_locks.


     |\__/|
     ( oo )    Kari Lavikka - tuner ( at ) bdb ( dot ) fi - (050) 380 3808
__ooO(  )Ooo_______ _____ ___ _ _  _   _    _      _                  _
       ""




В списке pgsql-performance по дате отправления:

Предыдущее
От: "Barry Lind"
Дата:
Сообщение: Performance problem using V3 protocol in jdbc driver
Следующее
От: Tom Lane
Дата:
Сообщение: Re: [JDBC] Performance problem using V3 protocol in jdbc driver