Hi all:
I realize this is slightly off topic, but is an issue of concern with
the use of ssd's. We are setting up a storage server under solaris
using ZFS. We have a couple of ssd's 2 x 160GB Intel X25-M MLC SATA
acting as the zil (write journal) and are trying to see if it is safe
to use for a power fail situation.
Our testing (10 runs) hasn't shown any data loss, but I am not sure
our testing has been running long enough and is valid, so I hoped the
people here who have tested an ssd for data loss may have some
guidance.
The testing method is to copy a bunch of files over NFS to the server
with the zil. When the copy is running along, pull the power to the
server. The NFS client will stop and if the client got a message that
block X was written safely to the zil, it will continue writing with
block x+1. After the server comes backup and and the copies
resume/finish the files are checksummed. If block X went missing, the
checksums will fail and we will have our proof.
We are looking at how to max out the writes to the SSD on the theory
that we need to fill the dram buffer on the SSD and get it saturated
enough such that it can't flush data to permanent storage as fast as
the data is coming in. (I.E. make it a writeback with a longer delay
so it's more likely to drop data.)
Does anybody have any comments or testing methodologies that don't
involve using an actual postgres instance?
Thanks for your help.
--
-- rouilj
John Rouillard System Administrator
Renesys Corporation 603-244-9084 (cell) 603-643-9300 x 111