[PERFORM] pgsql connection timeone

От: Vucomir Ianculov
Тема: [PERFORM] pgsql connection timeone
Дата: ,
Msg-id: 199526991.862.1485336217892.JavaMail.vukomir@DESKTOP-9I7P6HN
(см: обсуждение, исходный текст)
Ответы: Re: [PERFORM] pgsql connection timeone  (Vucomir Ianculov)
Re: [PERFORM] pgsql connection timeone  (Tom Lane)
Список: pgsql-performance

Скрыть дерево обсуждения

[PERFORM] pgsql connection timeone  (Vucomir Ianculov, )
 Re: [PERFORM] pgsql connection timeone  (Vucomir Ianculov, )
 Re: [PERFORM] pgsql connection timeone  (Tom Lane, )
  Re: [PERFORM] pgsql connection timeone  (Vucomir Ianculov, )
   Re: [PERFORM] pgsql connection timeone  (Vucomir Ianculov, )
    Re: [PERFORM] pgsql connection timeone  (Vitalii Tymchyshyn, )
     Re: [PERFORM] pgsql connection timeone  (Vucomir Ianculov, )
      Re: [PERFORM] pgsql connection timeone  (Vitalii Tymchyshyn, )
       Re: [PERFORM] pgsql connection timeone  (Vucomir Ianculov, )

Hi,

i'm seeing a lot of connection time out in postgresql log

2017-01-25 11:09:47 EET [6897-1] XXX@YYY FATAL:  canceling authentication due to timeout
2017-01-25 11:10:15 EET [6901-1] XXX@YYY FATAL:  canceling authentication due to timeout
2017-01-25 11:10:17 EET [6902-1] xxx@YYY FATAL:  canceling authentication due to timeout
2017-01-25 11:10:33 EET [6906-1] xxxx@YYY FATAL:  canceling authentication due to timeout
2017-01-25 11:10:44 EET [6912-1] xxx@YYY FATAL:  canceling authentication due to timeout
2017-01-25 11:10:48 EET [6913-1] xxx@YYY FATAL:  canceling authentication due to timeout
2017-01-25 11:10:52 EET [6920-1] xxx@YYY:  canceling authentication due to timeout
2017-01-25 11:10:52 EET [6930-1] postgres@postgres FATAL:  canceling authentication due to timeout
2017-01-25 11:10:53 EET [6921-1] xxx@YYY FATAL:  canceling authentication due to timeout
2017-01-25 11:11:08 EET [6933-1] xxx@YYY FATAL:  canceling authentication due to timeout

i also tired to login as postgres user from command line.

postgres@sppgsql01:~$ psql
psql: server closed the connection unexpectedly
        This probably means the server terminated abnormally
        before or while processing the request.

server load is ok, under 1,

memory usage is also ok.

root@server ~ # free -m
              total        used        free      shared  buff/cache   available
Mem:         128908        3398         795       31671      124714       92980
Swap:          8191        1418        6773

system is a ubuntu 16.04 and i'm using postgresql 9.3

connection limit is at 500 at the moment i have 180 connection, authentication_timeout is default 1 min.

here is the postgresql.conf

data_directory = '/var/lib/postgresql/9.3/main'         # use data in another directory
                                        # (change requires restart)
hba_file = '/etc/postgresql/9.3/main/pg_hba.conf'       # host-based authentication file
                                        # (change requires restart)
ident_file = '/etc/postgresql/9.3/main/pg_ident.conf'   # ident configuration file
                                        # (change requires restart)
external_pid_file = '/var/run/postgresql/9.3-main.pid'                  # write an extra PID file
                                        # (change requires restart)
listen_addresses = '*'          # what IP address(es) to listen on;
                                        # comma-separated list of addresses;
                                        # defaults to 'localhost'; use '*' for all
                                        # (change requires restart)
port = 5432                             # (change requires restart)
max_connections = 500 # (change requires restart)
unix_socket_directories = '/var/run/postgresql' # comma-separated list of directories
                                        # (change requires restart)
                                        # (change requires restart)
                                        # (change requires restart)
                                        # (change requires restart)
ssl = on                                # (change requires restart)
ssl_ciphers = 'DEFAULT:!LOW:!EXP:!MD5:@STRENGTH'        # allowed SSL ciphers
                                        # (change requires restart)
ssl_cert_file = 'server.crt'                # (change requires restart)
ssl_key_file = 'server.key'         # (change requires restart)
password_encryption = on
                                        # 0 selects the system default
                                        # 0 selects the system default
                                        # 0 selects the system default
                                        # (change requires restart)
                                        # (change requires restart)
                                        # in kB, or -1 for no limit
max_files_per_process = 5000            # min 25
                                        # (change requires restart)
vacuum_cost_delay =     20              # 0-100 milliseconds
vacuum_cost_page_hit = 1                # 0-10000 credits
vacuum_cost_page_miss = 10              # 0-10000 credits
vacuum_cost_page_dirty = 20             # 0-10000 credits
vacuum_cost_limit = 200         # 1-10000 credits
                                        # (change requires restart)
fsync = on                              # turns forced synchronization on or off
synchronous_commit = on                 # synchronization level;
                                        # off, local, remote_write, or on
wal_sync_method = fsync                 # the default is the first option
                                        # supported by the operating system:
                                        #   open_datasync
                                        #   fdatasync (default on Linux)
                                        #   fsync
                                        #   fsync_writethrough
                                        #   open_sync
full_page_writes = on                   # recover from partial page writes
wal_buffers = -1                        # min 32kB, -1 sets based on shared_buffers
                                        # (change requires restart)
wal_writer_delay = 200ms                # 1-10000 milliseconds
commit_delay = 0                        # range 0-100000, in microseconds
commit_siblings = 5                     # range 1-1000
checkpoint_segments = 64                # in logfile segments, min 1, 16MB each
checkpoint_timeout = 15min              # range 30s-1h
checkpoint_completion_target = 0.9      # checkpoint target duration, 0.0 - 1.0
checkpoint_warning = 30s                # 0 disables
                             
log_checkpoints = on
log_line_prefix = '%t [%p-%l] %q%u@%d '                 # special values:
                                      
log_timezone = 'Europe/Bucharest'
track_activities = on
track_counts = on
stats_temp_directory = '/var/run/postgresql/9.3-main.pg_stat_tmp'
autovacuum = on                         # Enable autovacuum subprocess?  'on'
                                        # requires track_counts to also be on.
log_autovacuum_min_duration = 0         # -1 disables, 0 logs all actions and
                                      
autovacuum_max_workers = 5              # max number of autovacuum subprocesses
                                        # (change requires restart)
autovacuum_naptime = 5min               # time between autovacuum runs
autovacuum_vacuum_threshold = 500       # min number of row updates before
                                        # vacuum
autovacuum_analyze_threshold = 500      # min number of row updates before
                                        # analyze
autovacuum_vacuum_scale_factor = 0.4    # fraction of table size before vacuum
autovacuum_analyze_scale_factor = 0.2   # fraction of table size before analyze
                                       
autovacuum_vacuum_cost_delay = 20ms     # default vacuum cost delay for
                                     
datestyle = 'iso, mdy'
timezone = 'Europe/Bucharest'
                                   
client_encoding = sql_ascii             # actually, defaults to database
                                        # encoding
lc_messages = 'C'                       # locale for system error message
                                        # strings
lc_monetary = 'C'                       # locale for monetary formatting
lc_numeric = 'C'                        # locale for number formatting
lc_time = 'C'                           # locale for time formatting
default_text_search_config = 'pg_catalog.english'
                                        # (change requires restart)
                                        # (change requires restart)
                                        # directory 'conf.d'
default_statistics_target = 100 # pgtune wizard 2016-12-11
maintenance_work_mem = 1GB # pgtune wizard 2016-12-11
constraint_exclusion = on # pgtune wizard 2016-12-11
effective_cache_size = 88GB # pgtune wizard 2016-12-11
work_mem = 64MB # pgtune wizard 2016-12-11
wal_buffers = 32MB # pgtune wizard 2016-12-11
shared_buffers = 30GB # pgtune wizard 2016-12-11


dose anyone know why this thing are happening?

Thanks.

Br,
Vuko

В списке pgsql-performance по дате сообщения:

От: Tom Lane
Дата:
Сообщение: Re: [PERFORM] pgsql connection timeone
От: Vucomir Ianculov
Дата:
Сообщение: Re: [PERFORM] pgsql connection timeone