diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml
index 6612f95f9f..1fa48058e8 100644
--- a/doc/src/sgml/config.sgml
+++ b/doc/src/sgml/config.sgml
@@ -3929,9 +3929,15 @@ ANY num_sync (
@@ -3946,9 +3952,13 @@ ANY num_sync ( ).
- This parameter can only be set at server start.
+ This parameter can only be set in the postgresql.conf
+ file or on the server command line.
This setting has no effect if primary_conninfo is not
- set.
+ set or the server is not in standby mode.
+
+
+ The WAL receiver is restarted after an update of primary_slot_name.
diff --git a/src/backend/access/transam/xlog.c b/src/backend/access/transam/xlog.c
index b7ff004234..743cae079e 100644
--- a/src/backend/access/transam/xlog.c
+++ b/src/backend/access/transam/xlog.c
@@ -803,6 +803,12 @@ static XLogSource readSource = 0; /* XLOG_FROM_* code */
static XLogSource currentSource = 0; /* XLOG_FROM_* code */
static bool lastSourceFailed = false;
+/*
+ * Need for restart running WalReceiver due the configuration change.
+ * Suitable only for XLOG_FROM_STREAM source
+ */
+static bool pendingWalRcvRestart = false;
+
typedef struct XLogPageReadPrivate
{
int emode;
@@ -11787,48 +11793,6 @@ WaitForWALToBecomeAvailable(XLogRecPtr RecPtr, bool randAccess,
if (!StandbyMode)
return false;
- /*
- * If primary_conninfo is set, launch walreceiver to try
- * to stream the missing WAL.
- *
- * If fetching_ckpt is true, RecPtr points to the initial
- * checkpoint location. In that case, we use RedoStartLSN
- * as the streaming start position instead of RecPtr, so
- * that when we later jump backwards to start redo at
- * RedoStartLSN, we will have the logs streamed already.
- */
- if (PrimaryConnInfo && strcmp(PrimaryConnInfo, "") != 0)
- {
- XLogRecPtr ptr;
- TimeLineID tli;
-
- if (fetching_ckpt)
- {
- ptr = RedoStartLSN;
- tli = ControlFile->checkPointCopy.ThisTimeLineID;
- }
- else
- {
- ptr = RecPtr;
-
- /*
- * Use the record begin position to determine the
- * TLI, rather than the position we're reading.
- */
- tli = tliOfPointInHistory(tliRecPtr, expectedTLEs);
-
- if (curFileTLI > 0 && tli < curFileTLI)
- elog(ERROR, "according to history file, WAL location %X/%X belongs to timeline %u, but previous recovered WAL file came from timeline %u",
- (uint32) (tliRecPtr >> 32),
- (uint32) tliRecPtr,
- tli, curFileTLI);
- }
- curFileTLI = tli;
- RequestXLogStreaming(tli, ptr, PrimaryConnInfo,
- PrimarySlotName);
- receivedUpto = 0;
- }
-
/*
* Move to XLOG_FROM_STREAM state in either case. We'll
* get immediate failure if we didn't launch walreceiver,
@@ -11928,10 +11892,66 @@ WaitForWALToBecomeAvailable(XLogRecPtr RecPtr, bool randAccess,
lastSourceFailed ? "failure" : "success");
/*
- * We've now handled possible failure. Try to read from the chosen
- * source.
+ * Request walreceiver to start if we switch from another source or if
+ * we need to change walreceiver connection configuration.
+ */
+ if (currentSource == XLOG_FROM_STREAM && (lastSourceFailed || pendingWalRcvRestart))
+ {
+ /*
+ * Ensure walreceiver is not running
+ */
+ if (WalRcvRunning())
+ ShutdownWalRcv();
+
+ /*
+ * If primary_conninfo is set, launch walreceiver to try to stream
+ * the missing WAL.
+ *
+ * If fetching_ckpt is true, RecPtr points to the initial
+ * checkpoint location. In that case, we use RedoStartLSN as the
+ * streaming start position instead of RecPtr, so that when we
+ * later jump backwards to start redo at RedoStartLSN, we will
+ * have the logs streamed already.
+ */
+ if (PrimaryConnInfo && strcmp(PrimaryConnInfo, "") != 0)
+ {
+ XLogRecPtr ptr;
+ TimeLineID tli;
+
+ if (fetching_ckpt)
+ {
+ ptr = RedoStartLSN;
+ tli = ControlFile->checkPointCopy.ThisTimeLineID;
+ }
+ else
+ {
+ ptr = RecPtr;
+
+ /*
+ * Use the record begin position to determine the TLI,
+ * rather than the position we're reading.
+ */
+ tli = tliOfPointInHistory(tliRecPtr, expectedTLEs);
+
+ if (curFileTLI > 0 && tli < curFileTLI)
+ elog(ERROR, "according to history file, WAL location %X/%X belongs to timeline %u, but previous recovered WAL file came from timeline %u",
+ (uint32) (tliRecPtr >> 32),
+ (uint32) tliRecPtr,
+ tli, curFileTLI);
+ }
+ curFileTLI = tli;
+ RequestXLogStreaming(tli, ptr, PrimaryConnInfo,
+ PrimarySlotName);
+ receivedUpto = 0;
+ }
+ }
+
+ /*
+ * We've now handled possible failure and configuration change. Try to
+ * read from the chosen source.
*/
lastSourceFailed = false;
+ pendingWalRcvRestart = false;
switch (currentSource)
{
@@ -12096,6 +12116,45 @@ WaitForWALToBecomeAvailable(XLogRecPtr RecPtr, bool randAccess,
return false; /* not reached */
}
+/*
+ * Re-read config file and plan to restart running walreceiver if
+ * connection settings was changed.
+ */
+void
+ProcessStartupSigHup(void)
+{
+ char *conninfo = pstrdup(PrimaryConnInfo);
+ char *slotname = pstrdup(PrimarySlotName);
+ bool conninfoChanged;
+ bool slotnameChanged;
+
+ ProcessConfigFile(PGC_SIGHUP);
+
+ /*
+ * We need restart walreceiver if replication settings was changed.
+ */
+ conninfoChanged = (strcmp(conninfo, PrimaryConnInfo) != 0);
+ slotnameChanged = (strcmp(slotname, PrimarySlotName) != 0);
+
+ if ((conninfoChanged || slotnameChanged) &&
+ currentSource == XLOG_FROM_STREAM
+ && WalRcvRunning())
+ {
+ if (conninfoChanged && slotnameChanged)
+ ereport(LOG,
+ (errmsg("The WAL receiver is going to be restarted due to change of primary_conninfo and primary_slot_name")));
+ else
+ ereport(LOG,
+ (errmsg("The WAL receiver is going to be restarted due to change of %s",
+ conninfoChanged ? "primary_conninfo" : "primary_slot_name")));
+
+ pendingWalRcvRestart = true;
+ }
+
+ pfree(conninfo);
+ pfree(slotname);
+}
+
/*
* Determine what log level should be used to report a corrupt WAL record
* in the current WAL page, previously read by XLogPageRead().
diff --git a/src/backend/postmaster/startup.c b/src/backend/postmaster/startup.c
index 5048a2c2aa..62492daf6b 100644
--- a/src/backend/postmaster/startup.c
+++ b/src/backend/postmaster/startup.c
@@ -142,12 +142,12 @@ void
HandleStartupProcInterrupts(void)
{
/*
- * Check if we were requested to re-read config file.
+ * Process any requests or signals received recently.
*/
if (got_SIGHUP)
{
got_SIGHUP = false;
- ProcessConfigFile(PGC_SIGHUP);
+ ProcessStartupSigHup();
}
/*
diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index 6abc780778..59834b9df8 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -644,7 +644,11 @@ WalRcvWaitForStartPosition(XLogRecPtr *startpoint, TimeLineID *startpointTLI)
walrcv->walRcvState == WALRCV_STOPPING);
if (walrcv->walRcvState == WALRCV_RESTARTING)
{
- /* we don't expect primary_conninfo to change */
+ /*
+ * We don't need handle changes of primary_conninfo or
+ * primary_slotname here. Startup process will shutdown running
+ * walreceiver in this case.
+ */
*startpoint = walrcv->receiveStart;
*startpointTLI = walrcv->receiveStartTLI;
walrcv->walRcvState = WALRCV_STREAMING;
diff --git a/src/backend/utils/misc/guc.c b/src/backend/utils/misc/guc.c
index 90ffd89339..5ffe593517 100644
--- a/src/backend/utils/misc/guc.c
+++ b/src/backend/utils/misc/guc.c
@@ -3558,7 +3558,7 @@ static struct config_string ConfigureNamesString[] =
},
{
- {"primary_conninfo", PGC_POSTMASTER, REPLICATION_STANDBY,
+ {"primary_conninfo", PGC_SIGHUP, REPLICATION_STANDBY,
gettext_noop("Sets the connection string to be used to connect to the sending server."),
NULL,
GUC_SUPERUSER_ONLY
@@ -3569,7 +3569,7 @@ static struct config_string ConfigureNamesString[] =
},
{
- {"primary_slot_name", PGC_POSTMASTER, REPLICATION_STANDBY,
+ {"primary_slot_name", PGC_SIGHUP, REPLICATION_STANDBY,
gettext_noop("Sets the name of the replication slot to use on the sending server."),
NULL
},
diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample
index 0fc23e3a61..c25e406b9e 100644
--- a/src/backend/utils/misc/postgresql.conf.sample
+++ b/src/backend/utils/misc/postgresql.conf.sample
@@ -308,9 +308,7 @@
# These settings are ignored on a master server.
#primary_conninfo = '' # connection string to sending server
- # (change requires restart)
#primary_slot_name = '' # replication slot on sending server
- # (change requires restart)
#promote_trigger_file = '' # file name whose presence ends recovery
#hot_standby = on # "off" disallows queries during recovery
# (change requires restart)
diff --git a/src/include/access/xlog.h b/src/include/access/xlog.h
index d519252aad..9e49020b19 100644
--- a/src/include/access/xlog.h
+++ b/src/include/access/xlog.h
@@ -320,6 +320,7 @@ extern void SetWalWriterSleeping(bool sleeping);
extern void XLogRequestWalReceiverReply(void);
+extern void ProcessStartupSigHup(void);
extern void assign_max_wal_size(int newval, void *extra);
extern void assign_checkpoint_completion_target(double newval, void *extra);
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 3c743d7d7c..ae80f4df3a 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -3,7 +3,7 @@ use strict;
use warnings;
use PostgresNode;
use TestLib;
-use Test::More tests => 32;
+use Test::More tests => 33;
# Initialize master node
my $node_master = get_new_node('master');
@@ -208,7 +208,9 @@ $node_standby_2->append_conf('postgresql.conf',
"primary_slot_name = $slotname_2");
$node_standby_2->append_conf('postgresql.conf',
"wal_receiver_status_interval = 1");
-$node_standby_2->restart;
+# should be able change primary_slot_name without restart
+# will wait effect in get_slot_xmins above
+$node_standby_2->reload;
# Fetch xmin columns from slot's pg_replication_slots row, after waiting for
# given boolean condition to be true to ensure we've reached a quiescent state
@@ -344,3 +346,21 @@ is($catalog_xmin, '',
is($xmin, '', 'xmin of cascaded slot null with hs feedback reset');
is($catalog_xmin, '',
'catalog xmin of cascaded slot still null with hs_feedback reset');
+
+note "check change primary_conninfo without restart";
+$node_standby_2->append_conf('postgresql.conf',
+ "primary_slot_name = ''");
+$node_standby_2->enable_streaming($node_master);
+$node_standby_2->reload;
+
+# be sure do not streaming from cascade
+$node_standby_1->stop;
+
+my $newval = $node_master->safe_psql('postgres',
+'INSERT INTO replayed(val) SELECT coalesce(max(val),0) + 1 AS newval FROM replayed RETURNING val'
+);
+$node_master->wait_for_catchup($node_standby_2, 'replay',
+ $node_master->lsn('insert'));
+my $is_replayed = $node_standby_2->safe_psql('postgres',
+ qq[SELECT 1 FROM replayed WHERE val = $newval]);
+is($is_replayed, qq(1), "standby_2 didn't replay master value $newval");