pgpool not connecting to standby server

Поиск
Список
Период
Сортировка
От HEMPLEMAN Matthew
Тема pgpool not connecting to standby server
Дата
Msg-id 3318efba9e8542639812d124a94d3c95@DB4PR48MB0124.041d.mgd.msft.net
обсуждение исходный текст
Список pgsql-admin

Hi All,

 

I’m working on a postgresql HA setup and running into an issue with pgpool.  I’m using built in postgres streaming replication and pgpool to monitor the cluster and initiate the failover process.  Pgpool has no trouble connecting to the master server; however, it will not connect to the standby.  This is the pgpool log on boot when it finds the master first:

 

2016-03-07 16:40:31: pid 13221: LOG:  reading status file: 1 th backend is set to down status

2016-03-07 16:40:31: pid 13221: LOG:  Setting up socket for 0.0.0.0:19999

2016-03-07 16:40:31: pid 13221: LOG:  Setting up socket for :::19999

2016-03-07 16:40:31: pid 13221: LOG:  pgpool-II successfully started. version 3.4.3 (tataraboshi)

2016-03-07 16:40:31: pid 13221: LOG:  find_primary_node: checking backend no 0

 

2016-03-07 16:40:31: pid 13221: LOG:  find_primary_node: primary node id is 0

 

And after shutting down the master:

 

2016-03-07 16:44:08: pid 13334: LOG:  failed to connect to PostgreSQL server on "192.168.2.114:5432", getsockopt() detected error "Operation now in progress"

2016-03-07 16:44:08: pid 13334: ERROR:  failed to make persistent db connection

2016-03-07 16:44:08: pid 13334: DETAIL:  connection to host:"192.168.2.114:5432" failed

2016-03-07 16:44:08: pid 13334: LOG:  failed to connect to PostgreSQL server on "192.168.2.114:5432", getsockopt() detected error "Operation now in progress"

2016-03-07 16:44:08: pid 13334: ERROR:  failed to make persistent db connection

2016-03-07 16:44:08: pid 13334: DETAIL:  connection to host:"192.168.2.114:5432" failed

2016-03-07 16:44:08: pid 13334: LOG:  setting backend node 0 status to NODE DOWN

2016-03-07 16:44:08: pid 13334: LOG:  starting degeneration. shutdown host 192.168.2.114(5432)

2016-03-07 16:44:08: pid 13334: LOG:  failover: no valid backends node found

2016-03-07 16:44:08: pid 13334: LOG:  Restart all children

2016-03-07 16:44:08: pid 13334: LOG:  execute command: /var/lib/pgsql/9.4/failover.sh 0 0 "" ""

2016-03-07 16:44:08: pid 13335: LOG:  child process received shutdown request signal 3

2016-03-07 16:44:08: pid 13336: LOG:  child process received shutdown request signal 3

2016-03-07 16:44:08: pid 13337: LOG:  child process received shutdown request signal 3

+ FALLING_NODE=0

+ OLDPRIMARY_NODE=0

+ NEW_PRIMARY=

+ PGDATA=

+ '[' 0 = 0 ']'

+ '[' 0 -eq 0 ']'

+ su postgres -c 'ssh -T postgres@ touch /var/lib/pgsql/9.4/data/failover.trigger'

 

And then it hangs on the script due to the missing parameters.  This happens no matter which server is the master.  Also, sometimes on boot pgpool seems to look for the standby first and this is the log I get:

 

 

2016-03-07 16:43:56: pid 13334: LOG:  reading status file: 1 th backend is set to down status

2016-03-07 16:43:56: pid 13334: LOG:  Setting up socket for 0.0.0.0:19999

2016-03-07 16:43:56: pid 13334: LOG:  Setting up socket for :::19999

2016-03-07 16:43:56: pid 13334: LOG:  pgpool-II successfully started. version 3.4.3 (tataraboshi)

2016-03-07 16:43:56: pid 13334: LOG:  find_primary_node: checking backend no 0

 

2016-03-07 16:43:56: pid 13334: LOG:  find_primary_node: primary node id is 0

2016-03-07 16:44:08: pid 13334: LOG:  failed to connect to PostgreSQL server on "192.168.2.114:5432", getsockopt() detected error "Operation now in progress"

2016-03-07 16:44:08: pid 13334: ERROR:  failed to make persistent db connection

2016-03-07 16:44:08: pid 13334: DETAIL:  connection to host:"192.168.2.114:5432" failed

2016-03-07 16:44:08: pid 13334: LOG:  failed to connect to PostgreSQL server on "192.168.2.114:5432", getsockopt() detected error "Operation now in progress"

2016-03-07 16:44:08: pid 13334: ERROR:  failed to make persistent db connection

2016-03-07 16:44:08: pid 13334: DETAIL:  connection to host:"192.168.2.114:5432" failed

2016-03-07 16:44:08: pid 13334: LOG:  setting backend node 0 status to NODE DOWN

2016-03-07 16:44:08: pid 13334: LOG:  starting degeneration. shutdown host 192.168.2.114(5432)

2016-03-07 16:44:08: pid 13334: LOG:  failover: no valid backends node found

2016-03-07 16:44:08: pid 13334: LOG:  Restart all children

2016-03-07 16:44:08: pid 13334: LOG:  execute command: /var/lib/pgsql/9.4/failover.sh 0 0 "" ""

2016-03-07 16:44:08: pid 13335: LOG:  child process received shutdown request signal 3

2016-03-07 16:44:08: pid 13336: LOG:  child process received shutdown request signal 3

2016-03-07 16:44:08: pid 13337: LOG:  child process received shutdown request signal 3

+ FALLING_NODE=0

+ OLDPRIMARY_NODE=0

+ NEW_PRIMARY=

+ PGDATA=

+ '[' 0 = 0 ']'

+ '[' 0 -eq 0 ']'

+ su postgres -c 'ssh -T postgres@ touch /var/lib/pgsql/9.4/data/failover.trigger'

^C

Session terminated, killing shell... ...killed.

+ exit 0

2016-03-07 16:44:34: pid 13334: LOG:  find_primary_node_repeatedly: waiting for finding a primary node

2016-03-07 16:44:34: pid 13334: LOG:  find_primary_node: checking backend no 0

 

2016-03-07 16:44:34: pid 13334: LOG:  find_primary_node: checking backend no 1

 

2016-03-07 16:44:34: pid 13334: LOG:  received fast shutdown request

2016-03-07 16:44:34: pid 13334: LOG:  shutdown request. closing listen socket

[root@URTTDFDB01 ~]# pgpool -n

2016-03-07 16:47:19: pid 13490: LOG:  reading status file: 0 th backend is set to down status

2016-03-07 16:47:19: pid 13490: LOG:  reading status file: 1 th backend is set to down status

2016-03-07 16:47:19: pid 13490: LOG:  Setting up socket for 0.0.0.0:19999

2016-03-07 16:47:19: pid 13490: LOG:  Setting up socket for :::19999

2016-03-07 16:47:19: pid 13490: LOG:  pgpool-II successfully started. version 3.4.3 (tataraboshi)

2016-03-07 16:47:19: pid 13490: LOG:  find_primary_node: checking backend no 0

 

2016-03-07 16:47:19: pid 13490: LOG:  find_primary_node: primary node id is 0

2016-03-07 16:43:56: pid 13334: LOG:  reading status file: 1 th backend is set to down status

2016-03-07 16:43:56: pid 13334: LOG:  Setting up socket for 0.0.0.0:19999

2016-03-07 16:43:56: pid 13334: LOG:  Setting up socket for :::19999

2016-03-07 16:43:56: pid 13334: LOG:  pgpool-II successfully started. version 3.4.3 (tataraboshi)

2016-03-07 16:43:56: pid 13334: LOG:  find_primary_node: checking backend no 0

 

2016-03-07 16:43:56: pid 13334: LOG:  find_primary_node: primary node id is 0

2016-03-07 16:44:08: pid 13334: LOG:  failed to connect to PostgreSQL server on "192.168.2.114:5432", getsockopt() detected error "Operation now in progress"

2016-03-07 16:44:08: pid 13334: ERROR:  failed to make persistent db connection

2016-03-07 16:44:08: pid 13334: DETAIL:  connection to host:"192.168.2.114:5432" failed

2016-03-07 16:44:08: pid 13334: LOG:  failed to connect to PostgreSQL server on "192.168.2.114:5432", getsockopt() detected error "Operation now in progress"

2016-03-07 16:44:08: pid 13334: ERROR:  failed to make persistent db connection

2016-03-07 16:44:08: pid 13334: DETAIL:  connection to host:"192.168.2.114:5432" failed

2016-03-07 16:44:08: pid 13334: LOG:  setting backend node 0 status to NODE DOWN

2016-03-07 16:44:08: pid 13334: LOG:  starting degeneration. shutdown host 192.168.2.114(5432)

2016-03-07 16:44:08: pid 13334: LOG:  failover: no valid backends node found

2016-03-07 16:44:08: pid 13334: LOG:  Restart all children

2016-03-07 16:44:08: pid 13334: LOG:  execute command: /var/lib/pgsql/9.4/failover.sh 0 0 "" ""

2016-03-07 16:44:08: pid 13335: LOG:  child process received shutdown request signal 3

2016-03-07 16:44:08: pid 13336: LOG:  child process received shutdown request signal 3

2016-03-07 16:44:08: pid 13337: LOG:  child process received shutdown request signal 3

+ FALLING_NODE=0

+ OLDPRIMARY_NODE=0

+ NEW_PRIMARY=

+ PGDATA=

+ '[' 0 = 0 ']'

+ '[' 0 -eq 0 ']'

+ su postgres -c 'ssh -T postgres@ touch /var/lib/pgsql/9.4/data/failover.trigger'

^C

Session terminated, killing shell... ...killed.

+ exit 0

2016-03-07 16:44:34: pid 13334: LOG:  find_primary_node_repeatedly: waiting for finding a primary node

2016-03-07 16:44:34: pid 13334: LOG:  find_primary_node: checking backend no 0

 

2016-03-07 16:44:34: pid 13334: LOG:  find_primary_node: checking backend no 1

 

2016-03-07 16:44:34: pid 13334: LOG:  received fast shutdown request

2016-03-07 16:44:34: pid 13334: LOG:  shutdown request. closing listen socket

[root@URTTDFDB01 ~]# pgpool -n

2016-03-07 16:47:19: pid 13490: LOG:  reading status file: 0 th backend is set to down status

2016-03-07 16:47:19: pid 13490: LOG:  reading status file: 1 th backend is set to down status

2016-03-07 16:47:19: pid 13490: LOG:  Setting up socket for 0.0.0.0:19999

2016-03-07 16:47:19: pid 13490: LOG:  Setting up socket for :::19999

2016-03-07 16:47:19: pid 13490: LOG:  pgpool-II successfully started. version 3.4.3 (tataraboshi)

2016-03-07 16:47:19: pid 13490: LOG:  find_primary_node: checking backend no 0

 

2016-03-07 16:47:19: pid 13490: LOG:  find_primary_node: primary node id is 0

2016-03-07 16:47:19: pid 13490: ERROR:  failed to authenticate

2016-03-07 16:47:19: pid 13490: DETAIL:  invalid authentication message response type, Expecting 'R' and received 'E'

2016-03-07 16:47:19: pid 13490: ERROR:  failed to authenticate

2016-03-07 16:47:19: pid 13490: DETAIL:  invalid authentication message response type, Expecting 'R' and received 'E'

2016-03-07 16:47:19: pid 13490: LOG:  setting backend node 1 status to NODE DOWN

2016-03-07 16:47:19: pid 13490: LOG:  starting degeneration. shutdown host 192.168.2.104(5432)

2016-03-07 16:47:19: pid 13490: LOG:  Restart all children

2016-03-07 16:47:19: pid 13490: LOG:  execute command: /var/lib/pgsql/9.4/failover.sh 1 0 192.168.2.114 /var/lib/pgsql/9.4/data/

2016-03-07 16:47:19: pid 13491: LOG:  child process received shutdown request signal 3

2016-03-07 16:47:19: pid 13492: LOG:  child process received shutdown request signal 3

2016-03-07 16:47:19: pid 13493: LOG:  child process received shutdown request signal 3

+ FALLING_NODE=1

+ OLDPRIMARY_NODE=0

+ NEW_PRIMARY=192.168.2.114

+ PGDATA=/var/lib/pgsql/9.4/data/

+ '[' 1 = 0 ']'

+ exit 0

2016-03-07 16:47:19: pid 13490: LOG:  failover: set new primary node: 0

2016-03-07 16:47:19: pid 13490: LOG:  failover: set new master node: 0

failover done. shutdown host 192.168.2.104(5432)2016-03-07 16:47:19: pid 13490: LOG:  failover done. shutdown host 192.168.2.104(5432)

2016-03-07 16:47:19: pid 13495: LOG:  worker process received restart request

2016-03-07 16:47:20: pid 13494: LOG:  restart request received in pcp child process

2016-03-07 16:47:20: pid 13490: LOG:  PCP child 13494 exits with status 256 in failover()

2016-03-07 16:47:20: pid 13490: LOG:  fork a new PCP child pid 13502 in failover()

2016-03-07 16:47:20: pid 13490: LOG:  child process with pid: 13491 exits with status 0

2016-03-07 16:47:20: pid 13490: LOG:  child process with pid: 13491 exited with success and will not be restarted

2016-03-07 16:47:20: pid 13490: LOG:  child process with pid: 13492 exits with status 0

2016-03-07 16:47:20: pid 13490: LOG:  child process with pid: 13492 exited with success and will not be restarted

2016-03-07 16:47:20: pid 13490: LOG:  child process with pid: 13493 exits with status 0

2016-03-07 16:47:20: pid 13490: LOG:  child process with pid: 13493 exited with success and will not be restarted

2016-03-07 16:47:20: pid 13490: LOG:  worker child process with pid: 13495 exits with status 256

2016-03-07 16:47:20: pid 13490: LOG:  fork a new worker child process with pid: 13503 2016-03-07 16:47:19: pid 13490: LOG:  setting backend node 1 status to NODE DOWN

2016-03-07 16:47:19: pid 13490: LOG:  starting degeneration. shutdown host 192.168.2.104(5432)

2016-03-07 16:47:19: pid 13490: LOG:  Restart all children

2016-03-07 16:47:19: pid 13490: LOG:  execute command: /var/lib/pgsql/9.4/failover.sh 1 0 192.168.2.114 /var/lib/pgsql/9.4/data/

2016-03-07 16:47:19: pid 13491: LOG:  child process received shutdown request signal 3

2016-03-07 16:47:19: pid 13492: LOG:  child process received shutdown request signal 3

2016-03-07 16:47:19: pid 13493: LOG:  child process received shutdown request signal 3

+ FALLING_NODE=1

+ OLDPRIMARY_NODE=0

+ NEW_PRIMARY=192.168.2.114

+ PGDATA=/var/lib/pgsql/9.4/data/

+ '[' 1 = 0 ']'

+ exit 0

2016-03-07 16:47:19: pid 13490: LOG:  failover: set new primary node: 0

2016-03-07 16:47:19: pid 13490: LOG:  failover: set new master node: 0

failover done. shutdown host 192.168.2.104(5432)2016-03-07 16:47:19: pid 13490: LOG:  failover done. shutdown host 192.168.2.104(5432)

2016-03-07 16:47:19: pid 13495: LOG:  worker process received restart request

2016-03-07 16:47:20: pid 13494: LOG:  restart request received in pcp child process

2016-03-07 16:47:20: pid 13490: LOG:  PCP child 13494 exits with status 256 in failover()

2016-03-07 16:47:20: pid 13490: LOG:  fork a new PCP child pid 13502 in failover()

2016-03-07 16:47:20: pid 13490: LOG:  child process with pid: 13491 exits with status 0

2016-03-07 16:47:20: pid 13490: LOG:  child process with pid: 13491 exited with success and will not be restarted

2016-03-07 16:47:20: pid 13490: LOG:  child process with pid: 13492 exits with status 0

2016-03-07 16:47:20: pid 13490: LOG:  child process with pid: 13492 exited with success and will not be restarted

2016-03-07 16:47:20: pid 13490: LOG:  child process with pid: 13493 exits with status 0

2016-03-07 16:47:20: pid 13490: LOG:  child process with pid: 13493 exited with success and will not be restarted

2016-03-07 16:47:20: pid 13490: LOG:  worker child process with pid: 13495 exits with status 256

2016-03-07 16:47:20: pid 13490: LOG:  fork a new worker child process with pid: 13503

 

So there is some kind of authentication issue but only for the standby server (and it’s not dependant on the physical server.. if I switch master and standby it still happens on new standby)?  Any ideas on what might be going on here?  Thanks.

 

 

Pgsql: 9.45

Pgpool: 3.4.3

 

 

 

Here is my pgpool.conf config:

 

# ----------------------------

# pgPool-II configuration file

# ----------------------------

#

# This file consists of lines of the form:

#

#   name = value

#

# Whitespace may be used.  Comments are introduced with "#" anywhere on a line.

# The complete list of parameter names and allowed values can be found in the

# pgPool-II documentation.

#

# This file is read on server startup and when the server receives a SIGHUP

# signal.  If you edit the file on a running system, you have to SIGHUP the

# server for the changes to take effect, or use "pgpool reload".  Some

# parameters, which are marked below, require a server shutdown and restart to

# take effect.

#

 

 

#------------------------------------------------------------------------------

# CONNECTIONS

#------------------------------------------------------------------------------

 

# - pgpool Connection Settings -

 

listen_addresses = '*'

                                   # Host name or IP address to listen on:

                                   # '*' for all, '' for no TCP/IP connections

                                   # (change requires restart)

port = 19999

                                   # Port number

                                   # (change requires restart)

socket_dir = '/tmp'

                                   # Unix domain socket path

                                   # The Debian package defaults to

                                   # /var/run/postgresql

                                   # (change requires restart)

 

 

# - pgpool Communication Manager Connection Settings -

 

pcp_listen_addresses = '*'

                                   # Host name or IP address for pcp process to listen on:

                                   # '*' for all, '' for no TCP/IP connections

                                   # (change requires restart)

pcp_port = 9898

                                   # Port number for pcp

                                   # (change requires restart)

pcp_socket_dir = '/tmp'

                                   # Unix domain socket path for pcp

                                   # The Debian package defaults to

                                   # /var/run/postgresql

                                   # (change requires restart)

listen_backlog_multiplier = 2

                                   # Set the backlog parameter of listen(2) to

                                                                                                                                   # num_init_children * listen_backlog_multiplier.

                                   # (change requires restart)

 

# - Backend Connection Settings -

 

backend_hostname0 = '192.168.2.114'

                                   # Host name or IP address to connect to for backend 0

backend_port0 = 5432

                                   # Port number for backend 0

backend_weight0 = 1

                                   # Weight for backend 0 (only in load balancing mode)

backend_data_directory0 = '/var/lib/pgsql/9.4/data/'

                                   # Data directory for backend 0

backend_flag0 = 'ALLOW_TO_FAILOVER'

                                   # Controls various backend behavior

                                   # ALLOW_TO_FAILOVER or DISALLOW_TO_FAILOVER

backend_hostname1 = '192.168.2.104'

backend_port1 = 5432

backend_weight1 = 1

backend_data_directory1 = '/var/lib/pgsql/9.4/data/'

backend_flag1 = 'ALLOW_TO_FAILOVER'

 

# - Authentication -

 

enable_pool_hba = off

                                   # Use pool_hba.conf for client authentication

pool_passwd = ''

                                   # File name of pool_passwd for md5 authentication.

                                   # "" disables pool_passwd.

                                   # (change requires restart)

authentication_timeout = 60

                                   # Delay in seconds to complete client authentication

                                   # 0 means no timeout.

 

# - SSL Connections -

 

ssl = off

                                   # Enable SSL support

                                   # (change requires restart)

#ssl_key = './server.key'

                                   # Path to the SSL private key file

                                   # (change requires restart)

#ssl_cert = './server.cert'

                                   # Path to the SSL public certificate file

                                   # (change requires restart)

#ssl_ca_cert = ''

                                   # Path to a single PEM format file

                                   # containing CA root certificate(s)

                                   # (change requires restart)

#ssl_ca_cert_dir = ''

                                   # Directory containing CA root certificate(s)

                                   # (change requires restart)

 

 

#------------------------------------------------------------------------------

# POOLS

#------------------------------------------------------------------------------

 

# - Pool size -

 

num_init_children = 3

                                   # Number of pools

                                   # (change requires restart)

max_pool = 1

                                   # Number of connections per pool

                                   # (change requires restart)

 

# - Life time -

 

child_life_time = 300

                                   # Pool exits after being idle for this many seconds

child_max_connections = 0

                                   # Pool exits after receiving that many connections

                                   # 0 means no exit

connection_life_time = 0

                                   # Connection to backend closes after being idle for this many seconds

                                   # 0 means no close

client_idle_limit = 0

                                   # Client is disconnected after being idle for that many seconds

                                   # (even inside an explicit transactions!)

                                   # 0 means no disconnection

 

 

#------------------------------------------------------------------------------

# LOGS

#------------------------------------------------------------------------------

 

# - Where to log -

 

log_destination = 'stderr'

                                   # Where to log

                                   # Valid values are combinations of stderr,

                                   # and syslog. Default to stderr.

 

# - What to log -

 

log_line_prefix = '%t: pid %p: '   # printf-style string to output at beginning of each log line.

 

log_connections = off

                                   # Log connections

log_hostname = off

                                   # Hostname will be shown in ps status

                                   # and in logs if connections are logged

log_statement = off

                                   # Log all statements

log_per_node_statement = off

                                   # Log all statements

                                   # with node and backend informations

log_standby_delay = 'if_over_threshold'

                                   # Log standby delay

                                   # Valid values are combinations of always,

                                   # if_over_threshold, none

 

# - Syslog specific -

 

syslog_facility = 'LOCAL0'

                                   # Syslog local facility. Default to LOCAL0

syslog_ident = 'pgpool'

                                   # Syslog program identification string

                                   # Default to 'pgpool'

 

# - Debug -

 

debug_level = 0

                                   # Debug message verbosity level

                                   # 0 means no message, 1 or more mean verbose

 

#log_error_verbosity = default          # terse, default, or verbose messages

 

#client_min_messages = notice           # values in order of decreasing detail:

                                        #   debug5

                                        #   debug4

                                        #   debug3

                                        #   debug2

                                        #   debug1

                                        #   log

                                        #   notice

                                        #   warning

                                        #   error

 

#log_min_messages = warning             # values in order of decreasing detail:

                                        #   debug5

                                        #   debug4

                                        #   debug3

                                        #   debug2

                                        #   debug1

                                        #   info

                                        #   notice

                                        #   warning

                                        #   error

                                        #   log

                                        #   fatal

                                        #   panic

 

#------------------------------------------------------------------------------

# FILE LOCATIONS

#------------------------------------------------------------------------------

 

pid_file_name = '/var/run/pgpool/pgpool.pid'

                                   # PID file name

                                   # (change requires restart)

logdir = '/tmp'

                                   # Directory of pgPool status file

                                   # (change requires restart)

 

 

#------------------------------------------------------------------------------

# CONNECTION POOLING

#------------------------------------------------------------------------------

 

connection_cache = off

                                   # Activate connection pools

                                   # (change requires restart)

 

                                   # Semicolon separated list of queries

                                   # to be issued at the end of a session

                                   # The default is for 8.3 and later

reset_query_list = 'ABORT; DISCARD ALL'

                                   # The following one is for 8.2 and before

#reset_query_list = 'ABORT; RESET ALL; SET SESSION AUTHORIZATION DEFAULT'

 

 

#------------------------------------------------------------------------------

# REPLICATION MODE

#------------------------------------------------------------------------------

 

replication_mode = off

                                   # Activate replication mode

                                   # (change requires restart)

replicate_select = off

                                   # Replicate SELECT statements

                                   # when in replication mode

                                   # replicate_select is higher priority than

                                   # load_balance_mode.

 

insert_lock = off

                                   # Automatically locks a dummy row or a table

                                   # with INSERT statements to keep SERIAL data

                                   # consistency

                                   # Without SERIAL, no lock will be issued

lobj_lock_table = ''

                                   # When rewriting lo_creat command in

                                   # replication mode, specify table name to

                                   # lock

 

# - Degenerate handling -

 

replication_stop_on_mismatch = off

                                   # On disagreement with the packet kind

                                   # sent from backend, degenerate the node

                                   # which is most likely "minority"

                                   # If off, just force to exit this session

 

failover_if_affected_tuples_mismatch = off

                                   # On disagreement with the number of affected

                                   # tuples in UPDATE/DELETE queries, then

                                   # degenerate the node which is most likely

                                   # "minority".

                                   # If off, just abort the transaction to

                                   # keep the consistency

 

 

#------------------------------------------------------------------------------

# LOAD BALANCING MODE

#------------------------------------------------------------------------------

 

load_balance_mode = off

                                   # Activate load balancing mode

                                   # (change requires restart)

ignore_leading_white_space = on

                                   # Ignore leading white spaces of each query

white_function_list = ''

                                   # Comma separated list of function names

                                   # that don't write to database

                                   # Regexp are accepted

black_function_list = 'currval,lastval,nextval,setval'

                                   # Comma separated list of function names

                                   # that write to database

                                   # Regexp are accepted

 

database_redirect_preference_list = ''

                                                                                                                                   # comma separated list of pairs of database and node id.

                                                                                                                                   # example: postgres:primary,mydb[0-4]:1,mydb[5-9]:2'

                                                                                                                                   # valid for streaming replicaton mode only.

 

app_name_redirect_preference_list = ''

                                                                                                                                   # comma separated list of pairs of app name and node id.

                                                                                                                                   # example: 'psql:primary,myapp[0-4]:1,myapp[5-9]:standby'

                                                                                                                                   # valid for streaming replicaton mode only.

allow_sql_comments = off

                                                                                                                                   # if on, ignore SQL comments when judging if load balance or

                                                                                                                                   # query cache is possible.

                                                                                                                                   # If off, SQL comments effectively prevent the judgment

                                                                                                                                   # (pre 3.4 behavior).

 

#------------------------------------------------------------------------------

# MASTER/SLAVE MODE

#------------------------------------------------------------------------------

 

master_slave_mode = on

                                   # Activate master/slave mode

                                   # (change requires restart)

master_slave_sub_mode = 'stream'

                                   # Master/slave sub mode

                                   # Valid values are combinations slony or

                                   # stream. Default is slony.

                                   # (change requires restart)

 

# - Streaming -

 

sr_check_period = 0

                                   # Streaming replication check period

                                   # Disabled (0) by default

sr_check_user = 'postgres'

                                   # Streaming replication check user

                                   # This is neccessary even if you disable streaming

                                   # replication delay check by sr_check_period = 0

sr_check_password = ''

                                   # Password for streaming replication check user

delay_threshold = 10000000

                                   # Threshold before not dispatching query to standby node

                                   # Unit is in bytes

                                   # Disabled (0) by default

 

# - Special commands -

 

follow_master_command = ''

                                   # Executes this command after master failover

                                   # Special values:

                                   #   %d = node id

                                   #   %h = host name

                                   #   %p = port number

                                   #   %D = database cluster path

                                   #   %m = new master node id

                                   #   %H = hostname of the new master node

                                   #   %M = old master node id

                                   #   %P = old primary node id

                                                                                                                                   #   %r = new master port number

                                                                                                                                   #   %R = new master database cluster path

                                   #   %% = '%' character

 

#------------------------------------------------------------------------------

# HEALTH CHECK

#------------------------------------------------------------------------------

 

health_check_period = 2

                                   # Health check period

                                   # Disabled (0) by default

health_check_timeout = 10

                                   # Health check timeout

                                   # 0 means no timeout

health_check_user = 'postgres'

                                   # Health check user

health_check_password = 'P0stgres'

                                   # Password for health check user

health_check_max_retries = 0

                                   # Maximum number of times to retry a failed health check before giving up.

health_check_retry_delay = 1

                                   # Amount of time to wait (in seconds) between retries.

connect_timeout = 10000

                                   # Timeout value in milliseconds before giving up to connect to backend.

                                                                                                                                   # Default is 10000 ms (10 second). Flaky network user may want to increase

                                                                                                                                   # the value. 0 means no timeout.

                                                                                                                                   # Note that this value is not only used for health check,

                                                                                                                                   # but also for ordinary conection to backend.

 

#------------------------------------------------------------------------------

# FAILOVER AND FAILBACK

#------------------------------------------------------------------------------

 

failover_command = '/var/lib/pgsql/9.4/failover.sh %d %P %H %R'

                                   # Executes this command at failover

                                   # Special values:

                                   #   %d = node id

                                   #   %h = host name

                                   #   %p = port number

                                   #   %D = database cluster path

                                   #   %m = new master node id

                                   #   %H = hostname of the new master node

                                   #   %M = old master node id

                                   #   %P = old primary node id

                                                                                                                                   #   %r = new master port number

                                                                                                                                   #   %R = new master database cluster path

                                   #   %% = '%' character

failback_command = ''

                                   # Executes this command at failback.

                                   # Special values:

                                   #   %d = node id

                                   #   %h = host name

                                   #   %p = port number

                                   #   %D = database cluster path

                                   #   %m = new master node id

                                   #   %H = hostname of the new master node

                                   #   %M = old master node id

                                   #   %P = old primary node id

                                                                                                                                   #   %r = new master port number

                                                                                                                                   #   %R = new master database cluster path

                                   #   %% = '%' character

 

fail_over_on_backend_error = on

                                   # Initiates failover when reading/writing to the

                                   # backend communication socket fails

                                   # If set to off, pgpool will report an

                                   # error and disconnect the session.

 

search_primary_node_timeout = 10

                                   # Timeout in seconds to search for the

                                   # primary node when a failover occurs.

                                   # 0 means no timeout, keep searching

                                   # for a primary node forever.

 

#------------------------------------------------------------------------------

# ONLINE RECOVERY

#------------------------------------------------------------------------------

 

recovery_user = 'nobody'

                                   # Online recovery user

recovery_password = ''

                                   # Online recovery password

recovery_1st_stage_command = ''

                                   # Executes a command in first stage

recovery_2nd_stage_command = ''

                                   # Executes a command in second stage

recovery_timeout = 90

                                   # Timeout in seconds to wait for the

                                   # recovering node's postmaster to start up

                                   # 0 means no wait

client_idle_limit_in_recovery = 0

                                   # Client is disconnected after being idle

                                   # for that many seconds in the second stage

                                   # of online recovery

                                   # 0 means no disconnection

                                   # -1 means immediate disconnection

 

 

#------------------------------------------------------------------------------

# WATCHDOG

#------------------------------------------------------------------------------

 

# - Enabling -

 

use_watchdog = off

                                    # Activates watchdog

                                    # (change requires restart)

 

# -Connection to up stream servers -

 

trusted_servers = ''

                                    # trusted server list which are used

                                    # to confirm network connection

                                    # (hostA,hostB,hostC,...)

                                    # (change requires restart)

ping_path = '/bin'

                                    # ping command path

                                    # (change requires restart)

 

# - Watchdog communication Settings -

 

wd_hostname = ''

                                    # Host name or IP address of this watchdog

                                    # (change requires restart)

wd_port = 9000

                                    # port number for watchdog service

                                    # (change requires restart)

wd_authkey = ''

                                    # Authentication key for watchdog communication

                                    # (change requires restart)

 

# - Virtual IP control Setting -

 

delegate_IP = ''

                                    # delegate IP address

                                    # If this is empty, virtual IP never bring up.

                                    # (change requires restart)

ifconfig_path = '/sbin'

                                    # ifconfig command path

                                    # (change requires restart)

if_up_cmd = 'ifconfig eth1:0 inet $_IP_$ netmask 255.255.255.0'

                                    # startup delegate IP command

                                    # (change requires restart)

if_down_cmd = 'ifconfig eth1:0 down'

                                    # shutdown delegate IP command

                                    # (change requires restart)

 

arping_path = '/usr/sbin'           # arping command path

                                    # (change requires restart)

 

arping_cmd = 'arping -U -I eth1 $_IP_$ -w 1'

                                    # arping command

                                    # (change requires restart)

 

# - Behaivor on escalation Setting -

 

clear_memqcache_on_escalation = on

                                    # Clear all the query cache on shared memory

                                    # when standby pgpool escalate to active pgpool

                                    # (= virtual IP holder).

                                    # This should be off if client connects to pgpool

                                    # not using virtual IP.

                                    # (change requires restart)

wd_escalation_command = ''

                                    # Executes this command at escalation on new active pgpool.

                                    # (change requires restart)

 

# - Lifecheck Setting -

 

# -- common --

 

wd_lifecheck_method = 'heartbeat'

                                    # Method of watchdog lifecheck ('heartbeat' or 'query')

                                    # (change requires restart)

wd_interval = 10

                                    # lifecheck interval (sec) > 0

                                    # (change requires restart)

 

# -- heartbeat mode --

 

wd_heartbeat_port = 9694

                                    # Port number for receiving heartbeat signal

                                    # (change requires restart)

wd_heartbeat_keepalive = 2

                                    # Interval time of sending heartbeat signal (sec)

                                    # (change requires restart)

wd_heartbeat_deadtime = 30

                                    # Deadtime interval for heartbeat signal (sec)

                                    # (change requires restart)

heartbeat_destination0 = 'host0_ip1'

                                    # Host name or IP address of destination 0

                                    # for sending heartbeat signal.

                                    # (change requires restart)

heartbeat_destination_port0 = 9694

                                    # Port number of destination 0 for sending

                                    # heartbeat signal. Usually this is the

                                    # same as wd_heartbeat_port.

                                    # (change requires restart)

heartbeat_device0 = ''

                                    # Name of NIC device (such like 'eth0')

                                    # used for sending/receiving heartbeat

                                    # signal to/from destination 0.

                                    # This works only when this is not empty

                                    # and pgpool has root privilege.

                                    # (change requires restart)

 

#heartbeat_destination1 = 'host0_ip2'

#heartbeat_destination_port1 = 9694

#heartbeat_device1 = ''

 

# -- query mode --

 

wd_life_point = 3

                                    # lifecheck retry times

                                    # (change requires restart)

wd_lifecheck_query = 'SELECT 1'

                                    # lifecheck query to pgpool from watchdog

                                    # (change requires restart)

wd_lifecheck_dbname = 'template1'

                                    # Database name connected for lifecheck

                                    # (change requires restart)

wd_lifecheck_user = 'nobody'

                                    # watchdog user monitoring pgpools in lifecheck

                                    # (change requires restart)

wd_lifecheck_password = ''

                                    # Password for watchdog user in lifecheck

                                    # (change requires restart)

 

# - Other pgpool Connection Settings -

 

#other_pgpool_hostname0 = 'host0'

                                    # Host name or IP address to connect to for other pgpool 0

                                    # (change requires restart)

#other_pgpool_port0 = 5432

                                    # Port number for othet pgpool 0

                                    # (change requires restart)

#other_wd_port0 = 9000

                                    # Port number for othet watchdog 0

                                    # (change requires restart)

#other_pgpool_hostname1 = 'host1'

#other_pgpool_port1 = 5432

#other_wd_port1 = 9000

 

 

#------------------------------------------------------------------------------

# OTHERS

#------------------------------------------------------------------------------

relcache_expire = 0

                                   # Life time of relation cache in seconds.

                                   # 0 means no cache expiration(the default).

                                   # The relation cache is used for cache the

                                   # query result against PostgreSQL system

                                   # catalog to obtain various information

                                   # including table structures or if it's a

                                   # temporary table or not. The cache is

                                   # maintained in a pgpool child local memory

                                   # and being kept as long as it survives.

                                   # If someone modify the table by using

                                   # ALTER TABLE or some such, the relcache is

                                   # not consistent anymore.

                                   # For this purpose, cache_expiration

                                   # controls the life time of the cache.

relcache_size = 256

                                   # Number of relation cache

                                   # entry. If you see frequently:

                                                                                                                                   # "pool_search_relcache: cache replacement happend"

                                                                                                                                   # in the pgpool log, you might want to increate this number.

 

check_temp_table = on

                                   # If on, enable temporary table check in SELECT statements.

                                   # This initiates queries against system catalog of primary/master

                                                                                                                                   # thus increases load of master.

                                                                                                                                   # If you are absolutely sure that your system never uses temporary tables

                                                                                                                                   # and you want to save access to primary/master, you could turn this off.

                                                                                                                                   # Default is on.

 

check_unlogged_table = on

                                   # If on, enable unlogged table check in SELECT statements.

                                   # This initiates queries against system catalog of primary/master

                                   # thus increases load of master.

                                   # If you are absolutely sure that your system never uses unlogged tables

                                   # and you want to save access to primary/master, you could turn this off.

                                   # Default is on.

 

#------------------------------------------------------------------------------

# IN MEMORY QUERY MEMORY CACHE

#------------------------------------------------------------------------------

memory_cache_enabled = off

                                                                                                                                   # If on, use the memory cache functionality, off by default

memqcache_method = 'shmem'

                                                                                                                                   # Cache storage method. either 'shmem'(shared memory) or

                                                                                                                                   # 'memcached'. 'shmem' by default

                                   # (change requires restart)

memqcache_memcached_host = 'localhost'

                                                                                                                                   # Memcached host name or IP address. Mandatory if

                                                                                                                                   # memqcache_method = 'memcached'.

                                                                                                                                   # Defaults to localhost.

                                   # (change requires restart)

memqcache_memcached_port = 11211

                                                                                                                                   # Memcached port number. Mondatory if memqcache_method = 'memcached'.

                                                                                                                                   # Defaults to 11211.

                                   # (change requires restart)

memqcache_total_size = 67108864

                                                                                                                                   # Total memory size in bytes for storing memory cache.

                                                                                                                                   # Mandatory if memqcache_method = 'shmem'.

                                                                                                                                   # Defaults to 64MB.

                                   # (change requires restart)

memqcache_max_num_cache = 1000000

                                                                                                                                   # Total number of cache entries. Mandatory

                                                                                                                                   # if memqcache_method = 'shmem'.

                                                                                                                                   # Each cache entry consumes 48 bytes on shared memory.

                                                                                                                                   # Defaults to 1,000,000(45.8MB).

                                   # (change requires restart)

memqcache_expire = 0

                                                                                                                                   # Memory cache entry life time specified in seconds.

                                                                                                                                   # 0 means infinite life time. 0 by default.

                                   # (change requires restart)

memqcache_auto_cache_invalidation = on

                                                                                                                                   # If on, invalidation of query cache is triggered by corresponding

                                                                                                                                   # DDL/DML/DCL(and memqcache_expire).  If off, it is only triggered

                                                                                                                                   # by memqcache_expire.  on by default.

                                   # (change requires restart)

memqcache_maxcache = 409600

                                                                                                                                   # Maximum SELECT result size in bytes.

                                                                                                                                   # Must be smaller than memqcache_cache_block_size. Defaults to 400KB.

                                   # (change requires restart)

memqcache_cache_block_size = 1048576

                                                                                                                                   # Cache block size in bytes. Mandatory if memqcache_method = 'shmem'.

                                                                                                                                   # Defaults to 1MB.

                                   # (change requires restart)

memqcache_oiddir = '/var/log/pgpool/oiddir'

                                                                                                                                   # Temporary work directory to record table oids

                                   # (change requires restart)

white_memqcache_table_list = ''

                                   # Comma separated list of table names to memcache

                                   # that don't write to database

                                   # Regexp are accepted

black_memqcache_table_list = ''

                                   # Comma separated list of table names not to memcache

                                   # that don't write to database

                                   # Regexp are accepted

 

Matt Hempleman

Software Engineer

GE’s Grid Solutions

 

M: 509-294-3913

matthew.hempleman@ge.com

www.gegridsolutions.com

 

10865 Willows RD NE

Redmond, Washington USA 98052

 

Imagination at work

 



CONFIDENTIALITY : This e-mail and any attachments are confidential and may be privileged. If you are not a named recipient, please notify the sender immediately and do not disclose the contents to another person, use it for any purpose or store or copy the information in any medium.

В списке pgsql-admin по дате отправления:

Предыдущее
От: lis_ba
Дата:
Сообщение: Restringir acesso ao pg_catalog
Следующее
От: CS DBA
Дата:
Сообщение: D.R. Site Failover (Streaming Replication) - user access / network options